TRW · Part number GDB3136 · NZ$119.00 incl. GST
Need new stoppers for your SUBARU LIBERO i? Brake pads are what you need! They clamp down on the rotors, turning 'go' into 'whoa'.
NZ$119.00 including GST. Part number GDB3136.
SUBARU LIBERO i Brake Pad Swap: A Kiwi DIY Guide
>Brake pads are like the tread on your gumboots – they wear down over time. They're crucial for turning your LIBERO i from a nippy runabout into a safe, stationary vehicle. Given the LIBERO i's a workhorse or family wagon, good brakes are a no-brainer, especially with our crazy roads.
Spotting the Warning Signs
• Brakes sound like a flock of seagulls (squealing).
• Pedal feels softer than a pavlova.
• Taking longer to pull up than a politician's promise.
• Steering wheel's doing the jitterbug when you brake.
• Pads are thinner than a cafe lunch receipt (less than 3mm).
WOF Woes?
Nah, mate, you'll fail your WOF faster than you can say "sweet as". They check pad thickness and brake function. Bald pads are a big no-no – unsafe and illegal.
DIY or Hand it Over?
Difficulty: 6/10
Time: A couple of hours per axle, give or take.
Gear you'll need: Jack, stands (never skip these!), wheel wrench, C-clamp or piston tool, spanners, torque wrench, brake cleaner, wire brush, and maybe a brake bleeder kit.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's sort the essentials to make this brake job a breeze and keep you safe as houses:
• Safety First, Mates!: Never, ever get under your LIBERO i supported only by a jack. Use proper axle stands – your life's worth more than saving a few bucks. Chuck on some Safety Glasses to keep the brake dust out of your peepers, and grab some Nitrile Gloves to keep your hands clean.
• Cleanliness is Key: Brake dust is nasty stuff. Grab a can of Brake Cleaner to blast away the muck from the calipers and rotors. This'll help your new pads bed in properly and keep things running smoothly.
• Stopping Squeals: A little smear of anti-seize caliper grease on the pad contact points will keep those annoying squeals at bay. Trust me, your neighbours will thank you.
• It'll make your life a whole lot easier.
Bob's Two Cents
I reckon you should swap those pads at the first sign of trouble to keep things safe and avoid wrecking your rotors. TRW's a top choice for your LIBERO i – good gear that lasts. Pop into Bob's Shop, and we'll sort you out!
Fitment Notes
Double-check you've got the right pads for your SUBARU LIBERO i's year (1991-2000) and model – they can vary. Give your rotors a good once-over while you're at it; if they're looking rough, get them machined or replaced for peak braking performance.
Bob's out! Swing by the shop if you get stuck!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF4096S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.