TRW Brake Pads Set (DB1072)
TRW · Part number GDB204 · NZ$150.00 incl. GST
Got an old-school Mitsubishi Delica, Express, or L300 (1980-1986)? Good on ya! Those vans are built tough, but the brakes need to be up to scratch. TRW brake pads are a top choice for reliable stopping power, and CARFIX has got 'em, plus other great brands too.
Price
NZ$150.00 including GST. Part number GDB204.
Fits these vehicles
Description
Brake Pad Replacement: TRW Edition for Your Classic Van
> Brake pads? They're the unsung heroes that clamp down on your brake rotors, turning all that forward motion into a nice, controlled stop. Now, if you're cruising around in a trusty old Mitsubishi Delica, Express, or L300, especially if you're hauling gear or battling city traffic, keeping those brake pads in good nick is absolutely crucial for your safety and everyone else on the road.
Reckon Your Pads Are Kaput?
• Hear a squeal, grind, or chirp when you hit the brakes? Sounds like a farmyard, eh?
• Taking longer to stop than you reckon it should? Pedal feelin' a bit soft?
• Getting the shakes through the steering wheel or brake pedal when you brake?
• Pads lookin' a bit thin? Less than 3mm of pad left? Time to get 'em sorted.
• Dashboard light's on? Your van's tryin' to tell ya something!
WOF Woes?
Mate, worn-out brake pads are a guaranteed WOF failure. No ifs, buts, or maybes. Even if they're just a bit dodgy, you'll likely get an advisory. Don't risk it.
DIY or Give it to a Pro?
Difficulty: 6/10 (Moderate)
Estimated Time: 1-2 hours per axle
Tools Required: Jack, jack stands (never skip these!), wheel nut wrench, C-clamp or brake caliper piston tool, socket set, torque wrench, brake cleaner, wire brush, rubber mallet (might come in handy).
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, listen up! Before you even think about cracking open that brake caliper, safety first! We're talking Safety Glasses to keep the grit out of your peepers and some Nitrile Gloves to keep your mitts clean – brake dust is nasty stuff. Grab a can of Brake Cleaner to blast away all that built-up carbon dust, it's like magic for brakes! And don't forget a dab of anti-seize caliper grease on the right spots; it'll keep everything moving smoothly and prevent those annoying squeals. Trust me, a few extra minutes on prep now saves you a whole heap of grief later. And for Pete's sake, never get under a car supported only by a jack!
Bob's Two Cents
Bob @ CARFIX reckons you should swap out those brake pads the moment you notice they're gettin' a bit thin or noisy. Keep things safe and avoid wrecking your rotors. TRW pads like the GDB204 are a solid choice for your Mitsubishi Delica, Express, or L300 – they're known for being reliable and lasting well. Come on down to Bob's Shop and we'll sort you out with the right parts for your trusty Mitsubishi van!
Fitment Notes
These pads are made to fit the front of Mitsubishi Delica, Express, and L300 vans made between 1980 and 1986. Always double-check your van's year and model to make sure you get the right fit. Things can vary, even within the same model range.
Bob @ CARFIX
---
🛠️ Bob's Pro Tip: Do the Job Right!
> MB.60.1V)](/parts/MB.60.1V) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.