
TRW · Part number GDB1915 · NZ$385.00 incl. GST
Need new brake pads for your BMW 5 or 7 Series?
NZ$385.00 including GST. Part number GDB1915.
Swapping Out Your BMW's Brake Pads — A TRW Special
> Brake pads: they're what stop your BMW 5 or 7 Series from becoming a lawn dart. They wear down over time thanks to heat and friction, so replacing them is crucial for keeping your braking sharp, especially in a sophisticated machine like yours.
Uh Oh... Symptoms of Worn Pads
• Sounds like a flock of seagulls every time you brake?
• Braking feels a bit... optimistic?
• That little brake pad light's glaring at you from the dash.
• Pads look thinner than a cafe lunch slice of ham?
• Your brake pedal's doing the funky chicken?
WOF Worries?
Worn brake pads are a surefire way to fail your WOF in New Zealand. Get them sorted to avoid the hassle.
DIY or Hand it Over?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack and stands, wrench set, socket set, brake cleaner, brake pad spreader, torque wrench.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, safety first, eh? Never get under a car supported only by a jack! Use proper stands. Grab some Nitrile Gloves to keep your hands clean, and safety glasses to protect your peepers from brake dust. Speaking of brake dust, a can of Brake Cleaner is your best mate for blasting that muck away from the rotors and calipers. A wee bit of anti-seize caliper grease will also keep things moving smoothly, preventing annoying squeals.
Expert Recommendation
Worn brake pads mean dodgy brakes, and that's a no-brainer when it comes to safety. Replacing them keeps you safe and stops other brake bits from getting damaged. While the TRW pad (GDB1915) is a top pick, CARFIX stocks a stack of brake pads from brands you trust. Pop into Bob's Shop for a yarn – he'll sort you out with the right part for your BMW.
Fitment Notes
Double-check these pads fit your specific BMW 5 or 7 Series model and brake setup. Pay attention to ActiveHybrid, d, i, or Li models.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (Part No. DF6311S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.