CARFIX

TRW Brake Pads Set Inc. Wear Sensor (DB1443)

TRW — TRW Brake Pads Set Inc. Wear Sensor (DB1443) — part number GDB1381

TRW · Part number GDB1381 · NZ$334.00 incl. GST

Right then, for your European beauty like a Volkswagen Passat or Audi A6, brake pads are the absolute heroes, turning all that go-fast energy into happy stopping power, and these TRW pads are a top-notch choice.

Price

NZ$334.00 including GST. Part number GDB1381.

Fits these vehicles

Description

Brake Pad Swap-Out: Getting Your VW or Audi Sorted with TRW
> G'day mate! Brake pads are those unsung heroes in your car's stopping system, designed to gradually wear down as they work their magic against the brake rotors. It's totally normal for them to get a bit tired over time, but when they're properly worn out, your stopping power takes a real hit – and that's just not on for a performance machine like your Volkswagen Passat or Audi A6.
How You Know It's Time for a Chat with Bob
• Hearin' a bit of a squeal or grind when you hit the anchors?
• Taking a bit longer to pull up, or feelin' like your brake pedal's gone a bit soft?
• Getting the shakes through the steering wheel or pedal when you're slowing down?
• Noticeably less oomph when you press the pedal?
• Dashboard light flashing at ya (if your pride and joy has fancy wear sensors).
Will it pass WOF?
Nah, no chance. If your brake pads are looking a bit sad and thin, your vehicle will absolutely fail its Warrant of Fitness (WOF) inspection here in New Zealand. You're looking at a minimum legal thickness of about 1.5mm, but honestly, you want to get 'em sorted well before that for top-notch safety and performance.
DIY or Workshop?
Difficulty: 6/10 (A bit of a mission, but totally doable for the keen DIYer)
Estimated Time: 1-2 hours per axle (grab a cuppa halfway through!)
Tools Required: Jack and trusty jack stands (safety first!), lug wrench, C-clamp or a proper brake caliper piston tool, a decent socket set, torque wrench (don't skimp on this!), brake cleaner, and maybe a wire brush for those stubborn bits.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, make sure you've got these bits and bobs ready to roll. Trust me, it makes the job heaps easier and safer:
• Blast Away the Gunk: A good Brake Cleaner spray is your best mate for getting rid of all that brake dust and grime. Keep things sparkling clean!
• Smooth Operator: Don't forget some anti-seize caliper grease for those sliding pins. It'll keep things moving freely and quietly.
• Eye Protection is Key: Grab some Safety Glasses. You only get one set of peepers, mate, protect 'em from flying dust and fluids!
• Keep Those Hands Clean: Heavy-duty Nitrile Gloves are a no-brainer. Brake dust is nasty stuff, and these will save your hands a world of pain.
Expert Recommendation
Bob @ CARFIX reckons you should get those brake pads checked and replaced at the very first whisper of wear or a drop in performance. It’s all about keeping your ride safe and stopping like a dream. These TRW GDB1381 brake pads are a fantastic shout – known for their quality, how well they perform, and keeping things nice and quiet, which is exactly what you want for a discerning owner of a Volkswagen Passat or Audi A6. Pop over to Bob's Shop for a yarn; he's always keen to help you figure out exactly what your Volkswagen or Audi needs!
Fitment Notes
These brake pads are specifically designed for a bunch of VOLKSWAGEN PASSAT models (from '96 to 2000, including the T, V6, and TDI variants) and AUDI A6s (from '97 to 2005, including T variants), AUDI ALLROADs (2002-2005, including V8 and TDI variants), and AUDI A4 S4s (1997-2001). Always, always double-check the exact year, model, and engine variant of your vehicle to make sure you've got the right fit. Brake bits can be a bit tricky, even within the same model range!
Chat with Bob @ CARFIX to make sure you've got the right bits for your ride!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (SKU DF2651S) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.