TRW · Part number GDB1377 · NZ$127.00 incl. GST
For your classic Volvo like the V70 Turbo or XC70 T, brake pads are the absolute heart of your stopping power, turning all that go-fast energy into safe, reliable brakes, and our TRW range is top-notch, sitting.
NZ$127.00 including GST. Part number GDB1377.
Brake Pad Replacement Guide — Let's Get Your Volvo Stopping Sweet as with TRW!
> Righto, brake pads are your car's unsung heroes, the bits that clamp down on your brake disc to haul your Volvo up. They're designed to wear out, mind — all that heat and friction takes its toll. You'll notice it more keenly in a gruntier model like the V70 Turbo or XC70 T, where peak performance matters.
What's That Racket? Signs Your Brakes Are Crying Out:
• A nails-on-a-chalkboard squeal or a proper grinding noise when you hit the pedal.
• Your brakes feeling a bit 'meh' or a spongy pedal that just doesn't bite like it used to.
• A shiver through the steering wheel or brake pedal when you're slowing down.
• Needing a bit more road than usual to come to a complete stop.
• Having a sticky beak and seeing less than 3mm of friction material left on your pads.
WOF Check? Not with Dodgy Brakes!
Nah, mate, worn-out brake pads are an instant fail for your Warrant of Fitness. If there's not enough pad left or any damage to your braking system, it's a no-go. Safety first, always!
DIY or Call in the Cavalry?
Difficulty: 6/10 (A bit of a challenge, but totally doable with a cuppa and some patience)
Estimated Time: About 1-2 hours per wheel — give yourself a good afternoon.
Tools You'll Need: A sturdy jack, some trusty jack stands (never get under a car supported only by a jack!), your wheel nut wrench, a C-clamp or a proper brake caliper piston tool, a spanner set, a torque wrench for tightness, a wire brush, some brake cleaner, safety glasses (can't be too careful!), and some good gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, let's make sure you've got everything sorted for a smooth, safe job:
• Safety First! Always wear your safety glasses to protect your peepers from dust and debris. A good pair of heavy-duty nitrile gloves will keep your hands clean and protected from grime and brake dust.
• Cleanliness is Key: Grab some quality brake cleaner spray to blast away carbon dust and any oily residue. It'll ensure your new pads seat perfectly and quietly.
• Smooth Operator: Don't forget some anti-seize caliper grease for the caliper pins. It'll keep things moving freely and quietly, preventing those annoying squeals down the track.
Bob's Top Tip for a Smooth Ride:
Bob @ CARFIX always reckons you should swap out those brake pads at the first hint of trouble to keep your Volvo stopping like a champ. These TRW pads are a fantastic shout for your Volvo, built tough for quality, durability, and consistent stopping power, especially for the V70 Turbo and XC70 T that demand a bit more. Pop into Bob's Shop for a yarn; he'll sort you out with exactly what your Volvo needs!
Fitment Notes — Double-Check Your Ride!
These brake pads are specifically designed for a bunch of Volvos, including the VOLVO V70 Turbo (1996-2000), VOLVO V90 (1997-1998), VOLVO S90 (1997-1998), VOLVO V70 Turbo (1999-2000), VOLVO XC70 T (1997-2002), VOLVO 940 ti (1995-1998), and VOLVO V70 T (1997-2000). Just make sure you're checking your exact year, model, and engine variant — especially those turbo models, as they can sometimes have different brake setups. No worries, Bob's got your back!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, don't skimp on fresh rotors. Check out our compatible TRW Disc Brake Rotors (SKU DF2660S) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.