TRW · Part number GDB109 · NZ$120.00 incl. GST
TRW Brake Pad Set by TRW, part number GDB109.
NZ$120.00 including GST. Part number GDB109.
Renault 8 & 10 Brake Pad Replacement Guide — Featuring TRW
> Brake pads, eh? Crucial bit of kit, especially on older machines like your Renault 8 or 10. These old girls don't have all the fancy ABS stuff, so keeping your brakes sharp is a no-brainer. Pads wear down over time, so keep an eye on them.
Symptoms That Led You Here
• Squealing or grinding noises when braking
• Reduced braking responsiveness
• Longer stopping distances
• The brake pad warning light is illuminated (if equipped)
• Visible wear or damage to the brake pads
Will it pass WOF?
Worn brake pads are a very common cause of WOF failures in New Zealand. Pads must have sufficient thickness to ensure safe braking performance. If your brake pads are worn close to the minimum thickness, they will need to be replaced to pass a WOF inspection.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, brake grease, C-clamp or brake spreader tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Right, before you get stuck in, let's talk safety and tidy work. You don't want to make a cafe lunch of it, do you?
• Safety Glasses: Flying brake dust is no fun. Protect your eyes!
• Nitrile Gloves: Keep your hands clean and away from brake dust. Trust me, you'll thank me later. Nitrile Gloves
• Brake Cleaner: Blast away all that nasty carbon dust. Makes the job cleaner and safer. Brake Cleaner
• Caliper Grease: A wee dab of anti-seize caliper grease on the contact points will keep things smooth and quiet. Don't go overboard, just a touch.
And a golden rule: Never, ever get under a car supported only by a jack! Use proper jack stands, aye?
Expert Recommendation
Worn brake pads? Gutted! Best get them sorted ASAP. Especially on older vehicles like the Renault 8 and 10. TRW brake pads (GDB109) are a bloody good choice for getting your braking back to scratch. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Renault. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
Ensure the brake pads are compatible with the specific model year and brake system of your Renault 8 or 10. Some models may have slight variations in brake pad design.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these brake pads, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Brakes get incredibly dirty. Keep a pack of Nitrile Gloves handy to protect your hands from stubborn brake dust.
• Clean and Prep: Use a high-quality Brake Cleaner spray to blast away stubborn dust, oil, and road grime from the caliper assembly and new rotors before reassembly.
• Lubrication: Apply a thin smear of high-temperature caliper grease to the pad backing plates and slide pins (keep it off the pad friction material!) to prevent squeals and ensure smooth caliper operation.