
Bosch · Part number FR7NI33 · NZ$67.00 incl. GST
Gotta keep those spark plugs firing right if you want your rig purring like a kitten!
NZ$67.00 including GST. Part number FR7NI33.
Spark Plug Replacement: Get Your Motor Humming with BOSCH
> Spark plugs are the unsung heroes of your engine, igniting that air/fuel mix in each cylinder. Over time, they wear down, causing misfires and a drop in power – especially noticeable in cars like the Volvo XC60 or Lexus GS 300 that need that power on tap.
Spotting the Warning Signs
• Engine's misfiring, especially when you put your foot down.
• Idling like a tractor, not a car.
• Fuel bills suddenly sky-high?
• That dreaded check engine light is glaring at you.
• Engine's a pain to start on those chilly mornings.
Will it pass WOF?
Dodgy spark plugs mean more emissions, and that could spell trouble at WOF time here in NZ.
DIY or Workshop?
Difficulty: 6/10
Time Needed: 1-2 hours
What You'll Need: Spark plug socket, ratchet, torque wrench, socket extension, gap tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, a bit of prep goes a long way:
• Safety First: Those spark plugs live in a hot environment. Make sure the engine is stone-cold before you even think about touching them.
• Keep it Clean: A can of Brake Cleaner is your best mate for blasting away any gunk or grime around the spark plug holes before you pull the old ones out. Don't want any of that falling into the cylinders!
• Hand Protection: Grab a pair of Nitrile Gloves to keep your mitts clean and protected from any stray oils or solvents.
• Spark Plug Gap: Double-check the spark plug gap before installing. A small gap tool will do the trick.
Expert Recommendation
Swapping out your spark plugs is a no-brainer for keeping your engine running sweet and saving you money at the pump. Bob @ CARFIX is ready to help you find the perfect fit for your vehicle. Swing by Bob's Shop for a yarn!
Fitment Notes
Make sure you get the spark plug gap spot-on for your engine. Some Volvo models might need special tools to get to those plugs.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.