CARFIX

NGK Iridium Spark Plug DR8EIX

NGK Spark Plugs · Part number DR8EIX · NZ$61.00 incl. GST

Gotta have good spark plugs to get that air/fuel mix firing properly, especially in the likes of a Ferrari Mondial or a BMW M3. Keeps things smooth and powerful.

Price

NZ$61.00 including GST. Part number DR8EIX.

Fits these vehicles

Description

Spark Plug Change-Out Guide — Featuring NGK
> Spark plugs are what give your engine that zap to get things moving. Over time, they get worn down by heat, general wear and tear, and carbon build-up. This can lead to misfires and a drop in performance, which you'll definitely notice in a high-performance machine like a Ferrari Mondial or a BMW M3.

Signs It's Time for a Change
• Engine's misfiring, especially when you put your foot down
• Idling's rough as guts
• Fuel economy's gone down the gurgler
• Engine's struggling to start
• Check engine light's on

Will it pass WOF?
Yep, as long as the engine's running sweet and not chucking out too many emissions because of dodgy spark plugs. Misfires are a definite WOF fail.

DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, torque wrench, socket extensions, spark plug gap tool, anti-seize compound.

Expert Recommendation
Swapping out your spark plugs is key to keeping your Ferrari or BMW running like a dream. Old plugs can cause misfires, drop your power, and even cause engine damage. Bob @ CARFIX is always around to help you figure out exactly what you need for your classic European car. Pop over to Bob's Shop for a yarn!

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, a few things to keep in mind to make this job a breeze:
• Safety First, Eh? Engines get hot, so make sure it's cooled down properly before you start poking around in there. Use Nitrile Gloves to keep the hands clean and avoid skin irritation from any oils or chemicals. A good pair of safety glasses is always recommended. No one wants a face full of carbon.
• Keep it Clean, Mate: Before you pull those old plugs, give the area around them a good clean with some compressed air or a brush. Stops any crud from falling into the cylinders. You could also use Brake Cleaner for a sparkling clean.
• A Little Lube Goes a Long Way: Smear a tiny bit of anti-seize compound on the new spark plug threads before you screw them in. Makes life easier next time you need to change them.

Fitment Notes
Make sure you set the right spark plug gap for your engine. Check your service manual for the recommended gap. Some models might need specific spark plug socket sizes or extensions to get to the plugs.

Bob's word: "Get the right plugs, gap 'em right, and your car will thank you for it!"

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.