NGK Iridium Double Fine Spark Plug

NGK Spark Plugs · Part number DILZKAR6A11 · NZ$49.00 incl. GST

Keep your Nissan Bluebird Sylphy or Tiida humming sweet as with fresh spark plugs! NGK plugs are top-notch for reliable spark, and we stock 'em.

Price

NZ$49.00 including GST. Part number DILZKAR6A11.

Fits these vehicles

• Mazda Familia (2007–2018)
• Nissan AD (2005+)
• Nissan AD (2006+)
• Nissan Bluebird Sylphy (2005–2012)
• Nissan Cube (2009–2012)
• Nissan Juke (2010–2019)
• Nissan Note (2006–2010)
• Nissan Note (2006–2012)
• Nissan Note (2006–2013)
• Nissan Tiida (2004–2012)

Description

Spark Plug Change-Out: The NGK Way
> Those little spark plugs? They're what gets your engine firing, turning petrol into power! Over time, they get worn by constant use, causing misfires and sluggish performance in rides like your Nissan Bluebird Sylphy or Mazda Familia. Time for a change, eh?

Symptoms That Led You Here
• Engine's misfiring, especially when you put your foot down
• Idling rough as guts
• Fuel economy's gone down the drain
• Hard to start the engine in the mornings
• That pesky check engine light's on

Will it pass WOF?
Dodgy spark plugs mean higher emissions, and that could mean a WOF failure. No one wants that!

DIY or Workshop?
Difficulty: 4/10
Estimated Time: 30-60 minutes
Tools Required: Spark plug socket, ratchet, extension, torque wrench, spark plug gap tool (feeler gauge).

Expert Recommendation
Swapping out your spark plugs when the book says to is a no-brainer for keeping your Nissan Juke or Note running its best, and sipping fuel gently. Give Bob a yell, and he'll sort you out with the right bits for your [Vehicle Type]! Swing by Bob's Shop for a yarn!

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, here's what you'll want handy:
• Safety First: Always wear Safety Glasses to keep bits out of your eyes, and Nitrile Gloves to protect your hands from grease. No one likes a trip to the doc or scrubbing black grime off afterwards!
• Cleanliness Counts: Grab some Brake Cleaner. A quick spray will blast away any carbon buildup around the plug holes before you remove the old plugs. Keeps things tidy and prevents crud from falling into the cylinders.
• The Right Touch: A tiny dab of anti-seize grease on the new plug threads makes them easier to remove next time. Don't go overboard, just a smidge!

Fitment Notes
Make sure you've got the right spark plug type and gap for your engine. Check your service manual for the exact specs. Some Nissans, like the Cube, might need special tools or steps to get the plugs out.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!

🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.