
NGK Spark Plugs · Part number DILFR6D11 · NZ$56.00 incl. GST
For petrol engines, spark plugs are the unsung heroes. Whether you're cruising in a Toyota Yaris or a Lexus RX 450h hybrid, these little guys deliver the spark for efficient combustion.
NZ$56.00 including GST. Part number DILFR6D11.
Spark Plug Swap-Out: The NGK Way
> Spark plugs? Yeah, they're kinda important. They light up the fuel-air mix in your engine. Over time, they get gunked up and worn out, especially if you're doing lots of short trips around town in your Yaris or RX 450h. That leads to misfires and a rough ride.
Spotting the Signs of Spark Plug Trouble
• Engine's misfiring, especially when you put your foot down
• Idling like a tractor
• Fuel economy's gone down the drain
• Hard to start the engine on a cold morning
• That dreaded check engine light's on
Will it pass WOF?
Dodgy spark plugs can cause emissions to spike, meaning a big fat WOF failure. No one wants that.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours
Tools Required: Spark plug socket, ratchet, torque wrench, socket extension, spark plug gap tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you dive in, let's make sure you're sorted. Safety first, always! Grab yourself some safety glasses to keep any stray bits out of your eyes.
Next, a can of Brake Cleaner is your best mate for blasting away any carbon buildup around the spark plug holes – keeps things clean and tidy. And don't forget a decent set of nitrile gloves; no one likes greasy mitts. You might also want to have a spark plug gapping tool handy to make sure the new plugs are spot on.
Expert Recommendation
Swapping out your spark plugs keeps your engine humming and saves you money at the pump. Pop into Bob's Shop for a yarn – I'll help you find the right plugs for your ride!
Fitment Notes
Make sure you're using the right spark plug type and gap for your engine. Check your service manual for the exact specs. Be extra careful if you're working on a Toyota or Lexus hybrid, as they can be a bit tight under the bonnet. Bob's the word!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're replacing this spark plug, make sure you've got the right workshop prep, protection, and safety gear ready. Taking a bit of extra time and using the proper safety stands and cleaners makes all the difference for a professional result!
🧰 What Else You'll Need:
• Safety First: Always secure your vehicle on heavy-duty safety jack stands before working underneath. Never rely solely on a hydraulic jack.
• Clean Hands: Keep a pack of Nitrile Gloves handy to protect your skin from grease, oils, and chemical sprays.
• Preparation: Have microfibre towels and a suitable parts cleaner nearby to keep components clean during installation.