TRW Brake Rotor 291mm x 8 Min
TRW · Part number DF7855S · NZ$217.00 incl. GST
Need new disc brake rotors for your trusty Mitsubishi Lancer? These TRW ones are just the ticket! They're what the brake pads grip to bring you to a safe stop. We reckon they're top-notch, and we stock 'em.
Price
NZ$217.00 including GST. Part number DF7855S.
Fits these vehicles
Description
Mitsubishi Lancer Disc Brake Rotor Replacement — Featuring TRW
> Disc brake rotors are those shiny metal discs doing the rounds with your wheels. When you hit the brakes, the pads squeeze tight against these rotors, using friction to slow you down. But, like anything, they wear out over time thanks to heat and friction. They might warp or crack, and that's no good for stopping safely, especially if you're using your Lancer for the daily grind and the odd back-road blast.
Spotting Trouble: Signs You Need New Rotors
• Feeling a wobble or pulsing through the brake pedal or steering wheel when you brake?
• Hearing squeals, grinds, or scrapes when you slow down?
• Taking longer to stop than usual?
• Seeing deep scratches, cracks, or burnt-looking spots on the rotor?
• Brake pedal feels soft or spongy?
WOF Woes? Rotor Problems Mean Fail!
No way around it. Dodgy brake rotors are a serious safety risk, and your Lancer will fail its WOF faster than you can say 'cafe lunch'. Rotors need to be above the minimum thickness and free from major damage.
DIY or Get a Pro?
Difficulty: 6/10 (A good weekend project)
Time Needed: An hour or two per wheel (front or back)
Gear You'll Need: Jack and stands, wheel wrench, socket set, torque wrench, G-clamp or caliper tool, brake cleaner, wire brush, maybe an impact wrench. Watch those brake lines when you're yanking off the calipers!
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, a little prep goes a long way. Grab yourself some Brake Cleaner to blast away that nasty brake dust – it's not good to breathe in. Smear a bit of anti-seize Caliper Grease on the caliper bolts to help them next time. Protect your eyes with Safety Glasses, and your hands will thank you for a pair of Nitrile Gloves. And for goodness sake, never get under a car that's only held up by a jack! Use proper stands.
Bob's Two Cents
Here at CARFIX, we know brakes are the most important safety feature on your Mitsubishi Lancer. If your rotors are past their prime, you're not just losing stopping power; you're also chewing through brake pads faster than a kid with a bag of lollies. We reckon it's a no-brainer to swap out the rotors when you're doing the pads. These TRW DF7855S rotors are a solid choice – they're known for being tough and giving you consistent braking. Swing by Bob's Shop for a yarn, and we'll sort you out with the right bits for your Lancer!
Important Fitment Notes
These rotors are the go for Mitsubishi Lancer models from 2007 onwards. But always double-check your year, model, and engine size to be 100% sure, as brake setups can be different even on the same model. Keep in mind that some high-performance Lancer models might have different brakes again.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB7743AT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.