CARFIX

TRW Disc Brake Rotor DF7788S

TRW — TRW Disc Brake Rotor DF7788S — part number DF7788S

TRW · Part number DF7788S · NZ$141.00 incl. GST

Gotta stop those 4x4s safely, eh? Disc brake rotors are the key, especially on tough rigs like your Nissan Navara or Holden Rodeo.

Price

NZ$141.00 including GST. Part number DF7788S.

Fits these vehicles

Description

Swapping Out Your Disc Brake Rotors — TRW Style
> Your Nissan Navara or Holden Rodeo relies on disc brake rotors to pull up safely. But these bits wear out over time, especially with all the heavy lifting and dusty metal tracks those 4x4s see.

What Clued You In?
• Sounds like a coffee grinder when you brake?
• Brake pedal doing the Macarena?
• Taking longer to stop than a freight train?
• Rotors looking like they've been through a war?
• Pads wearing unevenly? That's a worry, mate.

WOF on the Horizon?
Worn rotors are a dead cert for failing a WOF in New Zealand. They need to be above the minimum thickness and in good nick to pass the test. No worries, Bob's got you covered!

DIY or Get a Pro?
Difficulty: 6/10
Time it Takes: About 1.5 - 2 hours per axle
Gear You'll Need: Jack and stands (never skimp on safety!), wheel wrench, socket set, torque wrench, brake cleaner, rotor removal tool (might make life easier).

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, grab these must-haves to get the job done properly and safely:
• Safety First, Mates! Always wear safety glasses to protect your peepers from brake dust and debris. And never, ever get under a vehicle supported *only* by a jack. Use proper jack stands – no exceptions!
• Keep it Clean: Brake cleaner is your best mate here. Give those rotors a good blast to remove any carbon dust and grime before fitting the new ones. You can find great Brake Cleaner options right here at CARFIX.
• Glove Up: Brake dust is a bugger to get off your hands. Grab some heavy-duty Nitrile Gloves to keep your mitts clean and protected.
• Anti-Seize is Your Friend: A little anti-seize caliper grease on the caliper bolts will make your life easier next time you're doing a brake job. Trust me, you'll thank yourself later.

Expert Recommendation
Worn rotors are a no-brainer when it comes to safety. Get them sorted to keep your Navara or Rodeo stopping like it should. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your 4x4. Make sure you head over to Bob's Shop for a chat!

Fitment Notes
Replace rotors in pairs to keep braking even-stevens. Double-check the new rotors fit your specific model and brake setup. Some Navaras and Rodeos have different rotor sizes, so don't get caught out.

Bob's bottom line: Don't muck around with brakes. Get the right parts, do the job properly, and stay safe out there!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Navara Np300, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3404) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.