TRW · Part number DF7675S · NZ$280.00 incl. GST
TRW Disc Brake Rotor 308mm x 22 Min by TRW, part number DF7675S.
NZ$280.00 including GST. Part number DF7675S.
Swapping Out Your Disc Brake Rotors — TRW Style
> Your Holden Astra's disc brake rotors are a key part of pulling up safely. Over time, they cop a beating from friction and heat, which can make your braking a bit average, especially if you're always on the anchors around town.
What Gave the Game Away?
• Brakes sound like a startled pig?
• Your brake pedal's doing the Macarena?
• Braking feels a bit 'meh'?
• Rotors look like they've been through a war?
WOF Worthy?
Dodgy disc brake rotors are a classic reason for failing a WOF here in NZ. They need to be thick enough and not too hammered to pass the test.
DIY or Get a Pro?
Skill Level: 6/10
Time Needed: An hour and a half to two hours per axle
Gear You'll Need: Jack, stands, wheel brace, socket set, torque wrench, brake cleaner, and maybe a caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, let's make sure you're sorted with the right bits and pieces. Safety first, yeah?
• Safety Glasses: Don't want any of that brake dust or rust getting in your peepers. Safety Glasses
• Nitrile Gloves: Keep your mitts clean and away from brake fluid – that stuff's nasty. Nitrile Gloves
• Brake Cleaner: Blast away all that carbon dust and grime. Makes the job easier and keeps things clean. Brake Cleaner
• Caliper Grease: A little dab of anti-seize caliper grease goes a long way to keeping things moving smoothly and stopping those annoying squeaks. Ask Bob about it.
Bob's Two Cents
Replacing your Holden Astra's disc brake rotors is a no-brainer for keeping your braking top-notch. A good rotor like this TRW one (DF7675S) will give you reliable stopping power. Bob @ CARFIX is your man for sussing out exactly what you need for your Astra. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check this fits your specific Astra model and year, as rotor sizes can vary. Always do both sides of the axle at once for even braking.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB1350) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.