TRW · Part number DF7555S · NZ$234.00 incl. GST
Gotta keep those brakes sharp as a tack, mate! Disc brake rotors are what your brake pads grip onto to slow you down.
NZ$234.00 including GST. Part number DF7555S.
Disc Brake Rotor Replacement Guide — Featuring TRW
> Disc brake rotors are the unsung heroes of your Ford Falcon's braking. They're the surface your brake pads squeeze against to bring you to a halt. Over time, especially in a classic like the Falcon that cops a mix of open road and town driving, they can wear thin, warp, or crack.
Spotting Trouble: Is It Time for New Rotors?
• That juddering feeling in the brake pedal?
• Screeching like a banshee when you brake?
• Taking longer to stop than you'd like?
• Seeing cracks or deep grooves on the rotor itself?
• Brake pads wearing unevenly?
WOF Woes? Rotor Issues and Inspections
Dodgy disc brake rotors are a dead cert for a WOF failure here in NZ. They've gotta be above minimum thickness and crack-free to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: Give yourself 2-3 hours per axle.
Gear You'll Need: Jack and stands (never skimp on safety!), wheel brace, socket set, torque wrench, and some brake cleaner. A brake caliper tool might be handy too.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those rotors, let's make sure you're sorted with the right bits and bobs. Safety first, always!
• Safety Glasses: Keep that brake dust out of your peepers! Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from brake fluid. Nitrile Gloves
• Brake Cleaner: Blast away that brake dust and grime for a clean working surface. Brake Cleaner
• Anti-Seize Caliper Grease: A light smear on the caliper bolts helps keep things moving smoothly next time around. Get it at your local auto shop.
And a golden rule, never, ever get under a car supported only by a jack! Use proper stands. Now, let's get those rotors sorted!
Expert Recommendation
Replacing your Ford Falcon's disc brake rotors is a no-brainer for safe braking. If they're worn, you're not stopping as well as you should be. Give Bob @ CARFIX a shout; he knows Falcons inside and out and can point you to the perfect part. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check that the rotors fit your exact Falcon model and year. Rotor sizes and bolt patterns can change. Always swap rotors in pairs to keep braking even-stevens.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB7603DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.