TRW · Part number DF7417S · NZ$153.00 incl. GST
Need new brake rotors for your Daihatsu Hijet? Bugger! TRW rotors are top-notch for light commercials, giving you the stopping power you need.
NZ$153.00 including GST. Part number DF7417S.
Swapping Out Your Daihatsu Hijet's Disc Brake Rotors — TRW Style
> Your Daihatsu Hijet's disc brake rotors are what stop you, so worn ones are a safety hazard, especially with all the starts and stops a light commercial cops. Heat and heavy loads take their toll. Time for a change, mate?
Nasty Noises and Wobbly Wheels? Reasons You're Here:
• Brakes squealing like a stuck pig or grinding like gears.
• Brake pedal pulsing and vibrating something shocking.
• Taking longer to pull up than you'd like.
• Rotors looking scored, cracked, or rusty as.
WOF Woes?
Dodgy disc brake rotors? That's a quick way to fail your WOF here in New Zealand. They need to be a certain thickness and not too buggered to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: An hour or two per rotor
Gear You'll Need: Jack, stands, wheel brace, socket set, torque wrench, brake cleaner... maybe a caliper tool if things get sticky.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under your Hijet supported only by a jack. Use proper jack stands. Safety glasses are a no-brainer to keep that brake dust out of your eyes.
• Cleanliness is King: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner before you start pulling things apart. It'll make the job safer and easier.
• Protect Your Pride and Joy: A few squirts of anti-seize caliper grease on the threads and contact points will keep things moving smoothly. Plus, a good set of Nitrile Gloves will keep your hands clean.
Expert Recommendation
New rotors on your Hijet are a no-brainer for safe braking. Bob @ CARFIX is your man for sussing out the right parts for your Daihatsu Hijet. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure they fit your Hijet's year and model. Check the size and thickness against the old ones. Always do both rotors at once for even braking.
Bob's your uncle!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part 0232.00) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.