TRW · Part number DF7388S · NZ$168.00 incl. GST
TRW Brake Rotor 213mm x 13 Min by TRW, part number DF7388S.
NZ$168.00 including GST. Part number DF7388S.
Slapping on New Disc Brake Rotors — TRW Style
> Those disc brake rotors on your Daihatsu Hijet are real workhorses. All that stopping and starting, especially doing deliveries, chews them out over time. If they're past it, your braking could be dodgy.
What Gave It Away?
• Brakes screamin' like a gutted possum?
• Pedal juddering like crazy?
• Rotors lookin' like rusty corrugated iron?
• Taking ages to pull up?
WOF Woes?
Dodgy brake rotors are a dead cert for failing your WOF here in NZ. Gotta have enough thickness and no major damage to get the thumbs up.
DIY or Get a Pro?
Skill Level: 6/10 (Tricky, but doable)
Time Needed: An hour or two per rotor
What You'll Need: Jack, stands, spanners, sockets, brake cleaner, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, a few quick words from yours truly. First up, safety! Never, ever get under your Hijet supported only by a jack. Use proper axle stands, yeah? Grab some Nitrile Gloves to keep your hands clean from all that brake dust – nasty stuff. Give those new rotors a good spray with Brake Cleaner to get rid of any factory grease. And lastly, a tiny dab of anti-seize grease on the hub will make removal easier next time.
Expert Tip
Worn rotors aren't worth the risk, especially when you're hauling stuff in your Hijet. New ones mean safe braking and dodging accidents. Bob's always at the CARFIX shop to suss out what's what for your Daihatsu Hijet. Pop in for a yarn!
Fitment Notes
Double-check the rotor fits your Hijet (2005-2005). Always do 'em in pairs so your braking's even-stevens.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these disc brake rotor, don't skimp on proper workshop preparation and safety products. Doing the job right the first time protects your investment, saves massive workshop labor fees, and guarantees a quiet, smooth ride!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.