CARFIX

TRW Disc Brake Rotor 306.6mm x 10.5 min

TRW — TRW Disc Brake Rotor 306.6mm x 10.5 min — part number DF7230S

TRW · Part number DF7230S · NZ$149.00 incl. GST

If your Toyota Altezza or Verossa is feeling a bit dodgy underfoot when you hit the brakes, chances are it's time for some fresh disc brake rotors. These crucial bits provide the perfect surface for your brake pads to grab onto, giving you that essential stopping power.

Price

NZ$149.00 including GST. Part number DF7230S.

Fits these vehicles

Description

Give Your Altezza or Verossa the Stopping Power it Deserves with New Brake Rotors!
> Right, let's talk brakes! Those disc brake rotors are absolutely vital for keeping your Toyota Altezza or Verossa safe and sound on our Kiwi roads. They team up with your brake pads to turn all that go-fast energy into heat, bringing you to a smooth, controlled stop. But, like anything that works hard, especially with our spirited driving, they can get a bit tired, leading to dodgy braking. Time for a refresh, eh?
Is Your Ride Telling You It's Time for a Change?
• Feeling a bit of a wobble or pulse through the brake pedal or steering wheel when you slow down?
• Hearing some squealing, grinding, or a nasty scraping noise when you hit the anchors?
• Taking a bit longer to stop, or does the brake pedal feel a bit 'spongy'?
• Can you see grooves, scoring, or funny discolouration on the rotor surface?
• Catching a whiff of something burning after a spirited drive?
Will It Pass a WOF Check?
No, mate. If your brake rotors are looking worse for wear – think warped, damaged, or severely worn – your pride and joy will be getting a big red stamp from the WOF inspector. Safety first, and worn rotors are a big no-no. Any visible cracks, deep scoring, or if they're thinner than the manufacturer's minimum, it's an automatic fail.
Fancy a DIY Job or Head to the Workshop?
Difficulty: 6/10 (You'll need a few specific tools and a keen eye for detail)
Estimated Time: Allow 1-2 hours per axle – perfect for a Saturday morning project!
Tools Required: Jack, sturdy jack stands (never, ever rely just on a jack!), wheel nut wrench, brake caliper socket/spanner, C-clamp or a proper brake caliper piston tool, torque wrench (super important for safety!), wire brush, brake cleaner, and maybe an impact driver if those rotor retaining screws are being stubborn.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those rotors, let's make sure you've got everything you need for a safe and successful job. Think of this as your pre-flight checklist for a smooth landing!
• Safety First, Always! Grab yourself some Safety Glasses and a pair of heavy-duty Nitrile Gloves. You don't want brake dust in your eyes or grime on your hands – it's just not a good look!
• Cleanliness is Key! A good spray of Brake Cleaner will blast away all that old brake dust and crud, ensuring your new parts seat perfectly. Plus, it helps prevent those annoying squeaks!
• Smooth Operator! Don't forget some quality Anti-Seize Caliper Grease for those caliper bolts. It makes things slide nicely and helps prevent future headaches.
• Got all your tools? Double-check your toolkit. There's nothing worse than being halfway through a job and realising you're missing a crucial spanner!

Bob's Expert Advice
Here at CARFIX, Bob always says, "If your brakes are talking to you, listen!" Replacing those worn or damaged brake rotors isn't just about passing a WOF; it's about keeping you, your whānau, and everyone else on the road safe. For your Toyota Altezza or Verossa, the TRW disc brake rotor is a top-notch choice, built tough to give you reliable stopping power. Pop into Bob's Shop for a yarn – he's always happy to help you figure out exactly what your Toyota needs!
Fitment Notes
These disc brake rotors are tailor-made for various Toyota Altezza and Verossa models rolling off the line between 1998 and 2005. Just a friendly heads-up: always double-check the exact fitment for your specific year, model, and engine variant, as rotor sizes and specs can be a bit tricky and vary between models.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (SKU GDB1142) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.