CARFIX

TRW Disc Brake Rotor 278.7mm x 28 Min

TRW — TRW Disc Brake Rotor 278.7mm x 28 Min — part number DF7220S

TRW · Part number DF7220S · NZ$184.00 incl. GST

TRW Disc Brake Rotor 278.7mm x 28 Min by TRW, part number DF7220S.

Price

NZ$184.00 including GST. Part number DF7220S.

Fits these vehicles

Description

Swapping Out Your Disc Brake Rotors — TRW Style
> Disc brake rotors are key for safe stopping in your Nissan Caravan or Isuzu Como. They wear down over time, especially with the hard yards these vans often do. This means less braking power and could get a bit hairy.
Reckon You Need New Rotors? See If This Sounds Familiar:
• Brakes screamin' like a gutted cat?
• Steering wheel shakin' when you hit the anchors?
• Taking longer to pull up than you'd like?
• Rotors lookin' rough as guts with rust or grooves?
• Brake pads wearin' unevenly?
WOF Woes?
Dodgy disc brake rotors are a quick way to fail a WOF here in NZ. They gotta be thick enough and not too buggered to pass the test.
DIY or Get a Pro?
Skill Level: 6/10 (Tricky but doable)
Time Needed: An hour or two per rotor
Gear You'll Need: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, maybe a brake caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, mate, safety first! Never get under a van supported only by a jack — use proper stands. Grab some Nitrile Gloves to keep your hands clean, and Safety Glasses to keep the brake dust out of your eyes when you hit it with some Brake Cleaner to blast off the grime. A little squirt of anti-seize caliper grease on the caliper pins will keep things smooth as butter, too.
Bob's Two Cents
Worn brake rotors are a no-brainer when it comes to safety. Get 'em sorted to keep your van stoppin' sweet and avoid wear on other bits. Pop into Bob's Shop, and we'll sort you out with exactly what you need!
Fitment Notes
Make sure the new rotor is the right match for your specific Nissan Caravan or Isuzu Como year and model. Rotor sizes and thickness can vary, so double-check!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Homy, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3312DT) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.