TRW Brake Rotor 297mm x 9 Min
TRW · Part number DF6319S · NZ$218.00 incl. GST
Right then, for your trusty Toyota Verso, those disc brake rotors are the absolute business end of your stoppers; they're what turn all that get-up-and-go into a safe stop, and if they're a bit knackered, your family's safety on those school runs and motorway merges is on the line.
Price
NZ$218.00 including GST. Part number DF6319S.
Fits these vehicles
- Toyota Verso (2009–2018)
- Toyota Verso (2009–2018)
- Toyota Verso (2009–2018)
- Toyota Verso (2009–2018)
- Toyota Verso (2009–2018)
- Toyota Verso (2009–2018)
- Toyota Verso (2012–2018)
Description
Give Your Verso the Stopping Power It Deserves: Rotor Replacement with TRW
> Alright team, let's talk about those critical bits of metal that bring your family MPV to a halt — your disc brake rotors. They're the workhorses your brake pads squeeze against, and with all the stop-start city driving, fully loaded trips, and maybe even a wee trailer, they cop a fair bit of abuse. When they wear thin or get a bit wobbly, your Verso's braking performance goes out the window, and that's not good for anyone on board.
Symptoms That Led You Here
• Pulsation or vibration through the brake pedal during moderate to heavy braking
• Steering wheel shimmy when slowing from highway speeds
• Visible scoring, grooves, or lip formation on the rotor edge
• Grinding noise indicating pad-to-metal contact on a worn rotor
• Increased stopping distances, especially when the Verso is fully loaded with family and luggage
• Blue discolouration or heat spots indicating rotor overheating
Will it pass WOF?
NZ WOF inspection requires brake rotors to be above minimum thickness (stamped on the rotor), free from deep scoring or cracks, and not excessively warped. Rotors with visible cracks, heavy lipping beyond 1.5mm, or thickness below the manufacturer's minimum specification will fail. Inspectors also check for even pad contact patterns—uneven wear suggests rotor runout issues that require replacement.
DIY or Workshop?
Difficulty: 5/10 | Time: 1.5–2.5 hours per axle | Tools: Jack and stands, wheel brace, socket set (14mm, 17mm, 19mm typical), torque wrench, brake cleaner, copper grease, potentially a slide hammer if rotors are seized to the hub
Front rotors on the Verso are straightforward with the caliper bracket removed. Rear rotors may incorporate the parking brake mechanism, adding complexity. If you're uncomfortable bleeding brakes or lack a torque wrench for proper caliper bolt tension, a workshop visit ensures your family's safety.
Expert Recommendation
Brake rotors should always be replaced in axle pairs to maintain balanced braking performance—critical for a family vehicle like the Verso where predictable stopping protects passengers. TRW is an OE supplier to major European and Japanese manufacturers, and this SKU delivers factory-spec metallurgy and dimensional accuracy. Bob @ CARFIX is always on hand to help you work out exactly what rotor spec suits your Verso's driving conditions—whether it's daily school runs or longer North Island road trips. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
• Confirmed fitment for Toyota Verso variants from 2009–2018 including D-4D diesel, D-CAT, and VVTi petrol engines
• Verify front versus rear application before ordering—this listing may be axle-specific
• Some Verso models sold in NZ were marketed as Corolla Verso; cross-check your chassis code (ZGR2_, AUR2_) if uncertain
• Always replace brake pads when fitting new rotors to ensure proper bedding and avoid glazing
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (SKU GDB3479) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.