TRW · Part number DF6255S · NZ$242.00 incl. GST
Need new disc brake rotors for your BMW 1 Series, like the 118d or 118i? These are vital for stopping safely, giving your brake pads something to really bite into. Sorted!
NZ$242.00 including GST. Part number DF6255S.
Swapping Out Your BMW 1 Series Disc Brake Rotors — With TRW
> Your BMW 1 Series' disc brake rotors are what actually stop you, so they cop a hiding. Daily driving, especially in models like the 118d and 118i, wears them down. If they're past their best, your braking won't be as sharp, and that's not ideal, is it?
What Clued You In?
• Brakes squealing like stuck pigs?
• Brake pedal vibrating? Feels like a cellphone in your foot?
• Taking longer to stop than you used to?
• Can see grooves or damage on the rotor?
• Brake pads wearing unevenly? That's sus.
WOF Worries?
Worn rotors are a dead cert for failing a WOF here in NZ. They need to be above minimum thickness and in good nick to pass the test. No surprises there.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 1.5 - 2 hours per rotor
Gear You'll Need: Jack, axle stands (never skip these!), wheel brace, socket set, torque wrench, brake cleaner. You might need a brake caliper tool, too.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about cracking those wheel nuts, safety first, eh? Grab yourself some safety glasses to keep the crud out of your peepers, and a pair of nitrile gloves to keep your hands clean(ish). Brake dust is nasty stuff. While you're at it, give those new rotors a good blast with some Brake Cleaner to get rid of any manufacturing gunk. And don't forget a smear of anti-seize caliper grease on the caliper bolts to stop them seizing up next time. Never get under a car supported only by a jack! Axle stands are your best mate here.
Expert Recommendation
Keeping your BMW 1 Series' brake rotors in good nick is a no-brainer for safety. Pop into Bob's Shop; he'll sort you out with the right part for your BMW 1 Series.
Fitment Notes
Double-check it fits your specific BMW 1 Series year (2011-2019). Rotor sizes can vary, so make sure the specs match. Front and rear rotors are different, so don't mix them up!
Swing by Bob's for a yarn about the perfect parts!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB1934) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.