CARFIX

TRW Brake Rotor 268mm x 10 Min

TRW — TRW Brake Rotor 268mm x 10 Min — part number DF6128BS

TRW · Part number DF6128BS · NZ$1083.00 incl. GST

Right then, for your trusty European family wagon.

Price

NZ$1083.00 including GST. Part number DF6128BS.

Fits these vehicles

Description

Disc Brake Rotor Replacement Guide — Keepin' Your Kiwi Cruiser Safe with TRW!
> Disc brake rotors are those shiny metal discs your brake calipers grab onto, creating the friction that slows your vehicle down. Over time, all that heat and hard work means they can get a bit thin, warped, or grooved, which really puts a damper on your stopping power — especially for family-friendly rigs like the Citroen C4 Picasso and Peugeot Partner Tepee, which often haul heavy loads or tackle all sorts of urban and open roads across Aotearoa.
Signs It's Time for a Look-See
• Your brake pedal or steering wheel feels like it's doing a little jig when you hit the brakes.
• Nasty squealing, grinding, or scraping noises making themselves known when you slow down.
• Finding yourself needing a bit more road than usual to come to a full stop.
• You can actually see scoring, grooves, or funny discolouration on the rotor surface.
• The brake pedal feels a bit squishy, like a marshmallow.
Will it pass WOF?
Nah, mate. If your brake rotors are seriously worn, warped, or knackered, your vehicle will absolutely fail its Warrant of Fitness (WOF) inspection here in New Zealand. Good brakes aren't just a suggestion; they're a must-have for safety.
DIY or Workshop?
Difficulty: 6/10 (A bit of a mission, but doable)
Estimated Time: 1-2 hours per axle (grab a cuppa halfway through!)
Tools Required: Jack and sturdy jack stands (never get under a car supported only by a jack!), wheel nut wrench, brake caliper compression tool, socket set, torque wrench, brake cleaner, wire brush, and if you're lucky, an impact wrench.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, make sure you've got these bits and bobs handy to make the job smoother, safer, and cleaner:
• Brake Cleaner Spray: Essential for blasting away all that carbon dust and gunk from your calipers and hub assembly. Brake Cleaner
• Anti-Seize Caliper Grease: A dab of this on caliper slide pins ensures smooth operation and prevents seizing. Brake Grease
• Safety Glasses: Protect those peepers from flying debris and brake dust! Safety Glasses
• Heavy-Duty Nitrile Gloves: Keep your hands out of the grime and away from harsh chemicals. Nitrile Gloves
Expert Recommendation
Bob @ CARFIX always reckons you should swap out those brake rotors when they're showing their age or look a bit sad, or definitely when you're doing your brake pads. It's all about keeping your stoppers tip-top and your family safe. The TRW DF6128BS Disc Brake Rotor is a cracker of a choice — top quality, great performance, and built to meet or even beat the original factory specs for your Citroen or Peugeot. But hey, we've also got a whole range from other trusted names. Bob @ CARFIX is always keen for a yarn to help you figure out exactly what part you need for your Citroen C4 or Peugeot 5008. Pop over to Bob's Shop for a chat — coffee's usually on!
Fitment Notes
This particular TRW Disc Brake Rotor (DF6128BS) is built for a fair few Citroen and Peugeot models, including the Citroen C4 THP 155 (2009-2016), Citroen C4 HDi 90 (2009-2999), Citroen C4 GRAND PICASSO HDi 150 (2009-2013), Citroen C4 PICASSO HDi 110 (2010-2013), Citroen DS4 HDi 110 (2011-2015), Peugeot Partner Tepee HDi 16V (2008-2999), Peugeot 5008 HDi (2010-2017), Citroen Berlingo HDi 90 (2010-2017), and Citroen Berlingo VTi 120 (2009-2999). Always, always double-check the fitment against your vehicle's exact year, make, model, and engine variant — saves a lot of hassle down the track!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle Sw, always install fresh brake pads. Check out our compatible TRW Brake Pads (SKU GDB1330) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.