
TRW · Part number DF6117S · NZ$288.00 incl. GST
Gotta stop those sporty Renaults, eh? Disc brake rotors are what give your brake pads the surface they need to slow you down safely.
NZ$288.00 including GST. Part number DF6117S.
Swapping Out Your Renault's Brake Rotors — The TRW Way
> Disc brake rotors are dead important for stopping your Megane or Clio. They wear down over time, warp from the heat of the road, or get rusty, especially if you give your car a good thrashing.
Signs You've Come To The Right Place
• Brakes squealing like a stuck pig or grinding away?
• Brake pedal vibrating like crazy?
• Taking longer to stop than you'd like?
• Rotors looking scored, cracked, or covered in rust?
WOF Woes?
Worn brake rotors are a common cause for failing a WOF here in NZ. They need to be above minimum thickness and in good nick to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 1-2 hours per rotor
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, safety first! Grab some safety glasses to keep the crud out of your eyes, and a pair of nitrile gloves to keep your hands clean. You'll also want some brake cleaner to blast away all that nasty brake dust. Smells bad, and you don't want to breathe it in. A wee squirt of anti-seize caliper grease on the caliper bolts will make your life easier next time around.
Expert Recommendation
Worn rotors are a safety risk. Replacing them brings back that confident braking feel. Pop into Bob's Shop, and we'll sort you out with the right parts for your Renault. Too easy!
Fitment Notes
Double-check that these rotors fit your specific Megane or Clio model and year. Check the size and specs before you start. Some models might need special tools or steps.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Lutecia, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB1330) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.