TRW · Part number DF4808 · NZ$921.00 incl. GST
TRW Brake Rotor 273mm x 24 Min by TRW, part number DF4808.
NZ$921.00 including GST. Part number DF4808.
Swapping Out Your Toyota's Disc Brake Rotors — With TRW
> Disc brake rotors are the unsung heroes of your Toyota Corolla's braking. They're what the brake pads clamp onto to bring you to a halt. Daily driving, especially in tough conditions, can really take a toll on them, leading to wear, warping, or even cracks. Best get them sorted before your next WOF check!
What Clued You In?
• That brake pedal doing the jitterbug?
• Brakes squealing like a rusty gate?
• Taking forever and a day to stop?
• Rotors looking like they've been through a war?
WOF Worries?
Worn brake rotors are a no-no for WOFs here in New Zealand. They gotta be thick enough and free from cracks to pass the test. Don't get caught out!
DIY or Hand It Over?
Skill Level: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, maybe a caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, safety first, eh? Never get under a car supported only by a jack. Use proper stands! Grab some Nitrile Gloves to keep your hands clean, and safety glasses are a no-brainer when dealing with brake dust. Speaking of which, a good blast with Brake Cleaner will get rid of that nasty carbon buildup. And don't forget a smear of anti-seize caliper grease on the right spots to keep things moving smoothly.
Bob's Two Cents
Dodgy brake rotors are a serious safety risk in your Toyota Corolla. Replacing them is a real no-brainer for peace of mind! Pop into Bob's Shop, and we'll sort you out with exactly what you need for your Toyota Corolla. See ya soon!
Fitment Notes
Double-check these rotors fit your specific Corolla or Auris year and model. Rotor sizes can vary depending on the trim level or engine type.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Corolla, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3425) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.