
TRW · Part number DF4741S · NZ$268.00 incl. GST
Need new disc brake rotors for your Suzuki SX4 or SX4 S-Cross? These TRW rotors give your brake pads the surface they need to pull you up safely.
NZ$268.00 including GST. Part number DF4741S.
Swapping Out Your Suzuki SX4 Disc Brake Rotors — Starring TRW
> Your Suzuki SX4's disc brake rotors are dead important for stopping safely. Over time, they wear down from the pads rubbing on them – especially if you're doing lots of stop-start driving around our cities or tackling some tough conditions off the beaten track.
Spotting the Warning Signs
• Brakes making a racket? Squealing or grinding noises are a bad sign.
• Feeling a wobble or pulsing when you hit the brakes?
• Taking longer to stop than usual?
• Rotors looking rusty or scored?
WOF Woes?
Worn brake rotors are a surefire way to fail your WOF here in New Zealand. Make sure they're thick enough to pass the test!
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: Give yourself 2-3 hours per axle
Tools You'll Need: Jack and stands, wheel brace, socket set, torque wrench, and some brake cleaner. You might need a brake caliper tool as well.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, mate, safety first! Never get under a car that's only held up by a jack – use proper stands. Grab some Nitrile Gloves to keep your hands clean from all that brake dust. And speaking of brake dust, give everything a good blast with some Brake Cleaner – it'll help keep the dust down and stop it getting everywhere. A bit of anti-seize caliper grease on the right spots will help make the job easier next time, too. Safety glasses are a no-brainer to keep the crud out of your eyes.
Expert Recommendation
Replacing those worn rotors on your Suzuki SX4 is a no-brainer for safe driving. TRW makes a solid rotor, but CARFIX has other options to suit your budget. Old Bob's always here to lend a hand figuring out exactly what rotor you need for your Suzuki SX4. Pop over to Bob's Shop for a yarn!
Fitment Notes
Double-check these rotors fit your exact Suzuki SX4 model and year. Brake setups can be different, eh? Always replace rotors in pairs so your braking is even as.
Bob's Tip: Remember to bed in your new brake pads and rotors properly after fitting. This helps them work their best and last longer!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB1003) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.