TRW · Part number DF4569S · NZ$219.00 incl. GST
G'day! If you've got an 80s Nissan like a Skyline or Laurel, those Disc Brake Rotors are key for good stopping. They're what the brake pads grip onto.
NZ$219.00 including GST. Part number DF4569S.
Swapping Out Your Disc Brake Rotors — with TRW
> Disc brake rotors – they're those metal discs doing the hard yards when you hit the brakes. Over time, they can wear down, warp, or get all scored up. That's bad news for stopping, especially on older Skylines and Laurels that might be driven a bit hard, or are just showing their age.
Spotting the Trouble Signs
• Feeling a wobble or pulsing through the brake pedal or steering wheel when braking.
• Hearing squeals, grinding, or scraping when you brake.
• Not stopping as quick as you used to.
• Seeing grooves, scores, or funny colours on the rotor.
• Brake pedal feels soft or spongy.
WOF Woes?
Yep, you'll fail your Warrant of Fitness (WOF) faster than you can say 'flat tyre' if your brake rotors are buggered. Good brakes are a must for safety, no-brainer.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 1-2 hours per axle
Gear You'll Need: Jack and stands, wheel nut wrench, brake caliper compression tool, socket set, torque wrench, brake cleaner, wire brush, maybe an impact wrench.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, a few quick words from yours truly. Safety first, always! Never, ever get under a car supported only by a jack – use proper jack stands. Grab some Nitrile Gloves to keep your hands clean – brake dust is minging. And speaking of brake dust, give everything a good blast with some Brake Cleaner before you start pulling things apart. Lastly, a wee smear of anti-seize caliper grease on the appropriate spots will keep things moving smoothly for years to come.
Bob's Two Cents
Bob @ CARFIX reckons you should always swap out those brake rotors if they're looking worse for wear to keep your braking spot-on. The TRW DF4569S rotor? Solid choice. Known for being tough as nails, so your classic Nissan pulls up reliably. Pop into Bob's Shop for a yarn, and we'll sort you out with the right bits for your Skyline or Laurel!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB318) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.