
TRW · Part number DF4445S · NZ$344.00 incl. GST
Need new disc brake rotors for your Toyota Avensis or Caldina? These TRW ones are a solid choice for safe, reliable stopping power.
NZ$344.00 including GST. Part number DF4445S.
Swapping Out Your Disc Brake Rotors — TRW Edition
> Your Toyota Avensis or Caldina relies on its disc brake rotors to bring you to a halt safely. These rotors provide the crucial surface for your brake pads to clamp onto. Over time, especially with all that stop-start driving around our cities, they can wear thin, warp, or even crack. Ignoring worn rotors is a no-brainer for a WOF fail, so let's get them sorted.
Tell-tale Signs It's Time for New Rotors
• Brakes squealing like a gutted pig or making a nasty grinding noise
• Feeling a wobble or pulsing through the brake pedal
• Seeing deep grooves, cracks, or a build-up of rust on the rotor's surface
• Taking longer than usual to stop
WOF Woes? Rotor Problems and Inspections
Worn or damaged brake rotors are a surefire way to fail your WOF here in New Zealand. Your rotors need to be above the minimum thickness and free from significant damage to pass the test.
DIY or Leave it to the Pros?
Difficulty: 6/10
Estimated Time: 1.5 - 2 hours per axle
Tools You'll Need: Jack and stands, wheel wrench, socket set, torque wrench, Brake Cleaner, and maybe a brake caliper piston compression tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, safety first, eh? Never get under a car supported only by a jack, always use proper stands! Grab some Nitrile Gloves to keep your hands clean. And don't forget the Brake Cleaner – give everything a good blast to get rid of brake dust and grime. A wee squirt of anti-seize caliper grease on the caliper pins will keep things moving smoothly too. Safety glasses are a must to keep the crud out of your eyes.
Expert's Advice
Worn brake rotors compromise your Toyota Avensis or Caldina's stopping power. Replacing them keeps you safe and prevents damage to other brake parts.
Fitment Notes
Double-check that the new rotors fit your specific Toyota Avensis or Caldina model and year. Make sure the rotor diameter and thickness match what you've already got. Some models might have different rotor sizes depending on the trim or factory options.
Bob @ CARFIX is always keen to lend a hand figuring out the right parts for your Toyota. Pop into Bob's Shop for a yarn!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3336) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.