TRW Disc Brake Rotor 283mm x 23mm Min

TRW · Part number DF4386S · NZ$169.00 incl. GST

Your Mazda 6 or Atenza needs new disc brake rotors for safe stopping? These TRW ones are top-notch, giving your brake pads the perfect surface to do their job.

Price

NZ$169.00 including GST. Part number DF4386S.

Fits these vehicles

• Mazda 6 (2002–2005)
• Mazda 6 (2002–2005)
• Mazda 6 (2002–2005)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2007)
• Mazda 6 (2002–2008)
• Mazda 6 (2002–2012)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)
• Mazda 6 (2005–2007)

Description

Swapping Out Your Mazda 6 or Atenza's Disc Brake Rotors — TRW Edition
> Those disc brake rotors on your Mazda 6 or Atenza are vital for good stopping power. They get a real hammering from the brake pads and eventually wear out, which can make braking dodgy. Don't risk it, especially with how busy the roads are these days.

Spotting the Trouble
• Brakes squealing like a stuck pig or grinding something shocking?
• Brake pedal vibrating like crazy?
• Taking ages to pull up when you hit the brakes?
• Rotors looking all scored and rooted?
• Brake pads wearing unevenly?

WOF Worries?
Worn-out disc brake rotors are a dead cert for failing a WOF here in NZ. They need to be above the minimum thickness and in good nick to pass the test.

DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 1-2 hours per rotor
Tools Required: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, penetrating oil.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, a bit of prep goes a long way. Safety first, yeah? Never get under a car only held up by a jack – use proper stands! Grab some Nitrile Gloves to keep your hands clean from all that brake dust. Give those new rotors a good blast with Brake Cleaner to get rid of any factory grease. And a smear of anti-seize on the caliper bolts will make life easier next time.

Expert Recommendation
Replacing your Mazda 6 or Atenza's disc brake rotors is a no-brainer for safe braking. These TRW rotors (DF4386S) are a solid choice, but CARFIX has options for every budget. Bob's always keen for a yarn to sort you out with the right parts for your Mazda 6 or Atenza. Pop into Bob's Shop and let's get you sorted!

Fitment Notes
Double-check these rotors fit your Mazda 6 or Atenza's year model (2002-2008). Rotor diameter and thickness need to match the original specs.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Atenza, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3311) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.