
TRW · Part number DF4317S · NZ$129.00 incl. GST
Gotta keep those brakes sharp, eh? Toyota Corolla and Allex rotors are key for safe stops.
NZ$129.00 including GST. Part number DF4317S.
Swapping Out Your Toyota Corolla's Brake Rotors — TRW Edition
> Brake rotors are dead important for your Corolla's stopping power. They wear down over time, especially with all that city driving or if you're a bit heavy on the brakes. Time to get those replaced, bro!
What Clued You In?
• Brakes sound like a pack of seagulls arguing?
• Steering wheel's doing the Macarena when you brake?
• Taking longer to pull up than a mate trying to parallel park?
• Rotors look like they've been attacked by a grinder?
• Brake pads wearing unevenly?
Will it pass WOF?
Buggered rotors are a classic WOF fail. They gotta be thick enough and not too rooted to pass the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, and potentially a brake caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking on those rotors, let's make sure you're sorted. Safety first, always!
• Safety Glasses: Don't want any of that brake dust or rust getting in your peepers. Grab a pair of safety glasses; they are cheap as chips, mate.
• Nitrile Gloves: Keep your mitts clean and protected from brake fluid and grime. Nitrile Gloves are the way to go.
• Brake Cleaner: Blast away all that nasty brake dust and gunk before you start pulling things apart. Brake Cleaner is your best mate here.
• Caliper Grease: A little dab of anti-seize caliper grease will keep things moving smoothly and stop any annoying squeals. Worth its weight in gold!
Expert Recommendation
Worn rotors are a safety hazard, full stop. Get them sorted to keep your Corolla stopping like it should and avoid damaging other bits. Bob @ CARFIX is your man for sussing out the right part for your Toyota Corolla. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check this rotor fits your Corolla, Allex, or Runx year and model. Size matters, so compare dimensions and brake system type before you get stuck in. Some models are a bit special and need different tools.
Bob's always here to lend a hand, just ask!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Corolla;Runx, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3288) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.