CARFIX

TRW Disc Brake Rotor 257mm x 8.5 min DF4282S

TRW — TRW Disc Brake Rotor 257mm x 8.5 min — part number DF4282S

TRW · Part number DF4282S · NZ$166.00 incl. GST

For your zippy Hyundai Coupe or Tiburon, these TRW Disc Brake Rotors are absolutely crucial, providing the vital surface for your brake pads to clamp onto, turning all that kinetic energy into heat to reliably slow and stop your car.

Price

NZ$166.00 including GST. Part number DF4282S.

Fits these vehicles

Description

Disc Brake Rotor Replacement Guide — Featuring TRW: Keep Your Hyundai Coupe Grippin' the Road!
> Disc brake rotors are the unsung heroes of your stopping power, providing that essential friction surface for your brake pads. Over time, they naturally thin out, warp under pressure, or get grooved, which seriously knocks the stuffing out of your braking efficiency and safety. This is especially true for sporty coupes like your Hyundai Coupe and Tiburon, where a bit of spirited driving can really speed up that wear.
Signs It's Time for a Look-See
• That annoying shimmy or pulse you feel right through the brake pedal or steering wheel when you hit the anchors.
• Squealing, grinding, or a nasty scraping noise when you brake — not the sound of a happy car.
• Taking longer to stop than it used to, which is a big red flag.
• Obvious scoring, deep grooves, or weird discolouration on the rotor surface itself.
• A brake pedal that feels a bit soft or spongy, like a tired old cushion.
Will It Pass Its WOF?
No way, mate! Severely worn, warped, or damaged brake rotors will absolutely see your Hyundai fail its NZ Warrant of Fitness (WOF). Keeping your braking effective and perfectly balanced is a non-negotiable safety requirement.
DIY or Workshop?
Difficulty: 6/10 (Moderate — a decent weekend project!)
Estimated Time: 1-2 hours per axle (grab a cuppa and take your time!)
Tools Required: Jack, trusty jack stands (safety first!), lug wrench, socket set, torque wrench, C-clamp or a dedicated brake caliper piston tool, brake cleaner, wire brush, and perhaps an impact wrench if those bolts are stubborn.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive into swapping out those rotors, let's make sure you've got all the bits and bobs for a smooth, safe job:
• Safety Glasses: Absolutely essential! You don't want any brake dust or grime in your peepers. Grab a comfy pair of Safety Glasses.
• Heavy-Duty Nitrile Gloves: Keep those hands clean and protected from grease and grime. Our Nitrile Gloves are up to the task.
• Brake Cleaner: To blast away carbon dust and ensure everything is squeaky clean for reassembly. A good quality Brake Cleaner is your best friend here.
• Anti-Seize Caliper Grease: A dab on caliper slide pins and mounting points prevents seizing and ensures smooth brake operation. Don't skip this — it makes a big difference!
• Rust Penetrant Spray: For those really stubborn bolts that haven't seen daylight in ages, a squirt of Rust Penetrant Spray can save you a world of hurt. Give it time to work its magic!
• Workshop Towels/Rags: Always handy for wiping up spills or keeping parts clean. Old rags from home work a treat, or grab some dedicated Workshop Towels.
Expert Recommendation
Bob @ CARFIX always hammers home this point: if your brake rotors are looking tired, worn, or damaged, get 'em swapped! It's the only way to keep your braking performance tip-top and your safety locked in. These TRW DF4282S Disc Brake Rotors are a top-notch pick, famous for their quality and solid performance, making them perfect for your Hyundai Coupe and Tiburon. Bob @ CARFIX is always keen for a yarn to help you figure out exactly what part your Hyundai Coupe or Tiburon needs. Pop into Bob's Shop — the kettle's always on!
Fitment Notes
These disc brake rotors are tailored specifically for a range of V6 and GLS models of the Hyundai Coupe and Tiburon, rolling off the line between 1996 and 2009. Just a friendly heads-up: always double-check the exact fitment against your vehicle's specific year, make, model, and engine size. Even within the same model range, there can be little variations, so best to be sure!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (SKU GDB1010) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.