TRW · Part number DF4169S · NZ$152.00 incl. GST
TRW Disc Brake Rotor 280mm x 20 Min by TRW, part number DF4169S.
NZ$152.00 including GST. Part number DF4169S.
Swapping Out Your Disc Brake Rotors — TRW Style
> Your Nissan Bluebird or Primera relies on these rotors to stop safely. City driving or tackling those twisty roads? That chews through rotors! Less stopping power? Not ideal, mate.
Uh Oh... What's Up With Your Brakes?
• Brakes squealing like a piglet?
• Pedal vibrating like crazy?
• Taking ages to stop?
• Rotors look scored or beat up?
• Car pulling to one side when you hit the brakes?
WOF Woes?
Dodgy rotors are a dead cert for failing your WOF. They gotta be thick enough and not too wrecked to pass the test.
DIY or Time for a Cafe Lunch?
Difficulty: 6/10
Time Needed: 1-2 hours per rotor
Gear You'll Need: Jack and stands, spanners, sockets, torque wrench, brake cleaner, wheel chocks, gloves, and safety specs.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get cracking, a bit of Kiwi common sense, eh?
• Safety First, Mates! Never, ever get under a car supported only by a jack. Use proper stands; your life's worth more than a rotor change!
• Cleanliness is Next to Godliness: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner before you start pulling things apart. Keeps the dust down and gives you a cleaner surface to work on.
• Protect Your Hands: Those brake components can be grimy. Grab some Nitrile Gloves to keep your hands clean and protected. Plus, they give you a better grip.
• Grease is Your Friend: A little dab of anti-seize on the caliper bolts will make your life easier next time you're in there. Stops them seizing up, especially in our tough conditions.
Bob's Two Cents
Worn rotors? No-brainer, get them sorted! Your stopping power is too important. This TRW rotor (DF4169S) is a ripper choice. Bob @ CARFIX is your man for sussing out exactly what you need for your Nissan. Pop into Bob's Shop for a yarn!
Important Fitting Notes
Double-check these rotors fit your exact Nissan model and year. Rotor dimensions are key for a perfect fit. Some models might need special tools or tricks.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3168) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.