CARFIX

TRW Brake Rotor 275Mm X 28 Min

TRW — TRW Brake Rotor 275Mm X 28 Min — part number DF4114S

TRW · Part number DF4114S · NZ$224.00 incl. GST

Right then, for your zippy Toyota MR2, Disc Brake Rotors are absolutely vital for stopping power, giving your brake pads something solid to grab onto and turning all that go-fast energy into safe, controlled stopping power.

Price

NZ$224.00 including GST. Part number DF4114S.

Fits these vehicles

Description

Give Your MR2 the Stopping Power It Deserves: Rotor Replacement with TRW
> Let's be honest, you didn't get an MR2 to pootle around. When you're giving it a bit of stick, those brakes work hard! Disc brake rotors are the unsung heroes, but when they're warped, cracked, or worn thin from all that aggressive driving, your braking goes to custard, and that's not just a WOF fail waiting to happen – it's a safety hazard. Time to get them sorted!
Symptoms That Led You Here
• Vibration or pulsation felt through the brake pedal or steering wheel during braking.
• Squealing, grinding, or scraping noises when braking.
• Increased stopping distances.
• Visible scoring, grooves, or discolouration on the rotor surface.
• A burning smell after heavy braking.
Will it pass WOF?
No. Worn, warped, or damaged brake rotors will result in a WOF failure. The WOF inspection specifically checks for rotor thickness, cracks, and excessive scoring, as these directly impact braking performance and safety.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per axle (for experienced DIYers)
Tools Required: Jack, jack stands, wheel nut wrench, brake caliper compression tool, torque wrench, socket set, brake cleaner, wire brush, potentially impact driver for stubborn rotor screws.
Expert Recommendation
Replacing your brake rotors isn't just a good idea, it's absolutely crucial for keeping your MR2 stopping on a dime and keeping you safe, especially with the demands you put on a sports car. Worn-out rotors will compromise your stopping power faster than you can say 'gutted'. The TRW Disc Brake Rotor is a fantastic pick, known for its quality and performance, giving you reliable and consistent braking every single time. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Toyota MR2. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
These specific TRW Disc Brake Rotors are designed for various Toyota MR2 models from 1989-2000, including the 16V and Turbo variants. Always double-check the exact year and engine specifications of your MR2 to ensure correct fitment, as rotor dimensions can vary slightly between sub-models.

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3058) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.