TRW Disc Brake Rotor DF4006S
TRW · Part number DF4006S · NZ$91.00 incl. GST
Worn disc brake rotors? They're the bit that your brake pads squeeze to stop your Nissan Sentra or Pulsar.
Price
NZ$91.00 including GST. Part number DF4006S.
Fits these vehicles
- Nissan 100NX (1991–1994)
- Nissan 100NX (1993–1994)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1995–2000)
- Nissan Almera (1997–2000)
- Nissan Bluebird (1991–1995)
- Nissan Lucino (1994–1997)
- Nissan Lucino (1995–1999)
- Nissan Lucino (1995–2000)
- Nissan Lucino (1995–2000)
- Nissan Lucino (1996–1999)
- Nissan Lucino (1996–1999)
- Nissan Lucino (1997–1999)
- Nissan NX (1990–1994)
- Nissan Presea (1990–1992)
- Nissan Presea (1990–1994)
- Nissan Presea (1990–1995)
- Nissan Presea (1992–1995)
- Nissan Presea (1997–2000)
- Nissan Presea (1997–2000)
- Nissan Presea (1997–2000)
- Nissan Pulsar (1990–1995)
- Nissan Pulsar (1990–1995)
- Nissan Pulsar (1995–2000)
- Nissan Pulsar (1995–2000)
- Nissan Pulsar (1996–2000)
- Nissan Pulsar (1997–2000)
- Nissan Pulsar (1997–2000)
Description
Swapping Out Your Disc Brake Rotors — TRW Style
> Disc brake rotors are super important for your Nissan's stopping power. They wear down over time from the brake pads rubbing against them, especially if you're doing lots of city driving in your Nissan Sunny or NX.
Spotting the Trouble Signs
• Brakes making a racket? Squealing or grinding sounds are a bad sign.
• Feeling a judder when you hit the brakes?
• Taking longer to stop than usual?
• Rotors looking rough? Check for scoring, cracks, or rust.
WOF Woes?
Dodgy brake rotors are a quick way to fail a WOF here in New Zealand. They need to be above a minimum thickness and in good nick to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 1-2 hours per rotor
Gear You'll Need: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, and maybe a brake caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
• Safety First, Mates! Never, ever get under a car that's only held up by a jack. Use proper axle stands – it's a no-brainer.
• Keep it Clean: Brake dust is nasty stuff. Give everything a good blast with Brake Cleaner before you start pulling things apart. It'll make the job heaps cleaner and safer.
• Protect Your Hands: Those brake components can be rough on the skin. A decent pair of Nitrile Gloves will keep your hands clean and protected.
• Grease is Your Friend: Use a dab of anti-seize caliper grease on the caliper bolts. It'll make life easier next time you're in there.
Expert Recommendation
Bob at CARFIX reckons you should always replace brake rotors in pairs. Keeps things even and balanced. Keep an eye on them, especially if you're driving a Nissan Presea or Lucino. Pop into Bob's Shop for a yarn!
Fitment Notes
Double-check it fits your Nissan model and year, especially with models like the Nissan 100NX and NX GTI. Get the rotor measurements right before you start.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3114YO) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.