
TRW · Part number DF2599S · NZ$125.00 incl. GST
Need new brake rotors for your classic Audi 80 or Coupe?
NZ$125.00 including GST. Part number DF2599S.
Swapping Out Your Audi's Brake Rotors — TRW Edition
> Your Audi's brake rotors are basically the unsung heroes of stopping power. They take a beating from friction, heat, and all the crud the road throws at them, especially if you're giving your classic Audi 80 or Coupe a good thrashing.
Uh Oh, Sounds Like You've Got Rotor Troubles If...
• Braking sounds like a flock of seagulls fighting over chips (squealing or grinding).
• Your brake pedal's doing the Macarena (vibrating).
• Stopping distances are getting longer than a queue for a cafe lunch.
• Your rotors look like they've been attacked by a rusty spoon (scoring, cracks, or rust).
Will it pass WOF?
Worn brake rotors are a dead cert for a WOF failure here in NZ. Make sure they're thick enough and haven't got any nasty cracks or wear to get the green light.
DIY or Hand It Over to a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands (never get under a car supported only by a jack!), lug wrench, socket set, torque wrench, brake cleaner, rotor removal tool (maybe).
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about touching those rotors, safety first, mate! Grab some safety glasses to keep the crud out of your peepers and nitrile gloves to protect your hands from brake dust – that stuff's nasty. Have a can of brake cleaner handy to blast away any carbon dust or grime. And don't forget a dab of anti-seize caliper grease on the right spots to keep things moving smoothly.
Expert Recommendation
Getting those brake rotors sorted on your Audi is a no-brainer for safe driving. Bob at CARFIX is always keen to help you nail down the right part for your Audi. Pop over to Bob's Shop for a yarn!
Fitment Notes
Double-check these rotors fit your specific Audi 80 or Coupe – year and model matter! Size them up before you start wrenching. Some models might need special tools or a slightly different approach for getting the old rotors off.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB1044) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.