TRW · Part number DF1655S · NZ$235.00 incl. GST
Needing new disc brake rotors for your Ford Sierra is no laughing matter – they're what stops you!
NZ$235.00 including GST. Part number DF1655S.
Swapping Out Your Ford Sierra's Disc Brake Rotors — TRW Style
> Your Ford Sierra's disc brake rotors are proper important for pulling up safely. They cop a hiding from heat and friction, so they wear out over time. This can make your braking a bit dodgy, especially if you drive it hard or do a lot of stop-start driving.
Dodgy Rotor Symptoms
• Brakes squealing like a banshee or grinding like gears
• Brake pedal vibrating like crazy
• Braking feels weak as
• Rotors look rusty, scored, or just plain buggered
Will it pass WOF?
Worn or damaged disc brake rotors are a common cause for WOF failures in New Zealand. Rotors must meet minimum thickness requirements and be free from excessive damage to pass inspection.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per rotor
Tools Required: Jack, jack stands, wrench set, socket set, brake cleaner, torque wrench
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those rotors, here's a few things to keep in mind to make sure you're doing a top-notch job and staying safe while you're at it.
• Safety First, Mates! Never, ever get under your Sierra supported only by a jack. Use proper jack stands – your life's worth it.
• Cleanliness is Next to Godliness: Give those new rotors a good spray with Brake Cleaner to get rid of any manufacturing oils. Keeps things grippy from the get-go.
• Glove Up: Brake dust is minging stuff. Grab some Nitrile Gloves to keep your hands clean and protected.
• Anti-Seize is Your Friend: A wee dab of anti-seize caliper grease on the caliper bolts will make life easier next time you're wrenching.
Expert Recommendation
Dodgy brake rotors mean dodgy stopping! Replacing them keeps you safe and stops other brake bits from getting wrecked. Bob @ CARFIX is always on hand to help you work out exactly what part you need for your Ford Sierra. Make sure you head over to Bob's Shop for a chat!
Fitment Notes
Ensure compatibility with your specific Ford Sierra model and year. Check rotor dimensions and specifications before installation.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB472) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.