TRW Disc Brake Rotor 324mm

TRW · Part number DF1597S · NZ$231.00 incl. GST

Gotta stop those Beemers, right? Disc brake rotors are absolutely vital for keeping your BMW 7 or 8 Series pulling up safely.

Price

NZ$231.00 including GST. Part number DF1597S.

Fits these vehicles

• BMW 7 (1994–1996)
• BMW 7 (1994–1996)
• BMW 7 (1994–2001)
• BMW 7 (1995–2001)
• BMW 7 (1996–1998)
• BMW 7 (1996–2001)
• BMW 7 (1996–2001)
• BMW 7 (1998–2000)
• BMW 7 (1998–2001)
• BMW 7 (2000–2001)
• BMW 7 (2002–2005)
• BMW 7 (2003–2008)
• BMW 8 (1990–1994)
• BMW 8 (1993–1996)
• BMW 8 (1994–1999)
• BMW 8 (1996–1999)

Description

Swapping Out Your BMW's Disc Brake Rotors — TRW Style
> Your BMW's disc brake rotors are what the brake pads grab onto to slow you down. They take a hammering! Over time, they can wear thin, warp from all the heat, or just get plain rusty, especially on tough motors like the 7 and 8 Series. That affects your braking and, more importantly, your safety. Let's get them sorted.

What Clued You In?
• Your brake pedal's doing the Macarena (pulsating or vibrating).
• The brakes are squealing like a pig or grinding away.
• Taking longer than usual to pull up.
• Rotors look like they've been attacked with a grinder.
• Your brake pads are wearing unevenly.

WOF Woes?
Dodgy brake rotors are a surefire way to fail a WOF here in NZ. They gotta be above the minimum thickness and in decent nick to pass the test.

DIY or Get a Pro?
Difficulty: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands (never get under a car only supported by a jack!), wheel brace, socket set, torque wrench, brake cleaner, rotor removal tool (makes life easier).

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, mate, safety first! Grab yourself some safety glasses to keep the rust and brake dust out of your eyes. And a decent set of nitrile gloves will save your hands from getting covered in brake filth – trust me, it's a mission to get off! Blast those rotors and calipers clean with some Brake Cleaner before you start pulling things apart; it'll make the job much tidier. When reassembling, a smear of anti-seize caliper grease on the right spots will keep things moving smoothly and prevent squealing. Don't skimp on safety or cleanliness – it'll make the job safer and easier.

Bob's Two Cents
Worn rotors are a no-brainer when it comes to safety. A new set keeps you stopping as you should and saves other parts from damage. Come have a yarn with me down at Bob's Shop, and we'll get your Beemer sorted!

Fitment Facts
Double-check these rotors fit your exact BMW 7 or 8 Series model and year. Measure the rotor diameter and thickness before you start swinging spanners. Some models might need special tools to get the old rotors off. No use getting gutted when you get stuck!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB1261) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.