TRW · Part number DF1524S · NZ$356.00 incl. GST
Gotta keep that classic VW Kombi or Transporter stopping sweet, eh? Disc brake rotors are what the brake pads grab onto.
NZ$356.00 including GST. Part number DF1524S.
Slapping on New Disc Brake Rotors — with TRW
> Disc brake rotors are the unsung heroes in your classic VW Kombi or Transporter's braking setup. They cop a hammering over time, especially with all those stop-starts around town or when you're loaded up with gear. Don't get caught out with dodgy brakes; it's just not worth it.
What Clued You In?
• Brakes sound like a flock of seagulls arguing?
• Pedal's doing the Macarena when you brake?
• Taking longer to pull up than a cafe lunch?
• Rotors look like they've been attacked by a grinder?
• Brake pads wearing unevenly? That's not ideal, mate.
WOF Woes?
Worn or rooted disc brake rotors are a dead cert for a WOF failure here in NZ. They gotta be above the minimum thickness and free from cracks to pass the test. Don't risk it!
DIY or Get a Pro?
Skill Level: 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands (never skip on safety!), lug wrench, socket set, torque wrench, brake cleaner, and maybe a caliper tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, safety first! Grab some safety glasses to keep the crud out of your eyes and nitrile gloves to keep your hands clean. Give those new rotors a good blast with brake cleaner to get rid of any manufacturing gunk. And when you're reassembling the calipers, a wee dab of [anti-seize caliper grease] will keep things smooth as silk for the next brake job. Don't skimp on the essentials – it'll save you headaches down the line!
Bob's Two Cents
Swapping out your disc brake rotors is a no-brainer for keeping your Kombi or Transporter safe as houses. A worn rotor means less stopping power, and that's just asking for trouble. Pop into Bob's Shop for a yarn, and we'll get you sorted with the right bits for your Volkswagen.
Important Fitting Notes
Double-check those new rotors are the right fit for your Kombi or Transporter's year and model. Rotor diameter and thickness need to match the original specs. Some models had different sizes, so don't just assume!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle;Transporter, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB407) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.