CARFIX

TRW Disc Brake Rotor 243mm x 17 Min

TRW — TRW Disc Brake Rotor 243mm x 17 Min — part number DF1441S

TRW · Part number DF1441S · NZ$99.00 incl. GST

New disc brake rotors are vital for keeping your classic Japanese ride, like a Toyota Corona or MR2, stopping safely. They're the bit the brake pads grip to slow you down.

Price

NZ$99.00 including GST. Part number DF1441S.

Fits these vehicles

Description

Swapping Out Your Disc Brake Rotors — TRW Style
> Your disc brake rotors are a key part of your braking setup. They're what your brake pads squeeze against to bring you to a halt. Over time, especially on trusty steeds like the Toyota Corona and MR2 that see a bit of everything, rotors can wear thin, warp, or even crack.

Spotting the Signs of Trouble
• Brakes squealing or making a grinding noise? That's not good.
• Feeling a wobble or shudder when you hit the brakes?
• Taking longer to stop than usual?
• Seeing grooves, rust, or cracks on the rotor surface?
• Brake pads wearing unevenly?

Will it pass WOF?
Worn rotors are a dead cert for a WOF failure here in New Zealand. They need to be above the minimum thickness and free from major damage to pass the test. No stress, CARFIX can help you sort it.

DIY or Workshop?
Skill Level: 6/10
Time Needed: An hour or two per rotor
Gear You'll Need: Jack and stands (never skip on safety!), wheel wrench, socket set, spanners, brake cleaner, torque wrench, and maybe a caliper tool.

🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking, here's a few things to keep in mind to make sure the job's done right, and you're safe as houses:
• Safety First, Mates!: Brakes are critical. If you're in doubt, get a certified mechanic to do the job. Never get under a car supported only by a jack – use proper stands!
• Keep it Clean: Brake dust is a bugger. A good blast with some Brake Cleaner will keep things tidy and help your new rotors bed in properly.
• Glove Up: Protect your hands from the grime with some Nitrile Gloves. Trust me, your hands will thank you.
• Anti-Seize is Your Friend: A dab of anti-seize caliper grease on the caliper pins will make future brake jobs a breeze. A little goes a long way.

Expert Recommendation
Worn rotors mean dodgy brakes, and that's a no-go. Getting them replaced keeps you safe and stops other brake bits from getting damaged. Pop into Bob's Shop and we can sort you out with the right parts for your Toyota. No worries!

Fitment Notes
Make sure the new rotors are a match for your exact Toyota model and year. Some have different sizes or setups. Always swap out rotors in pairs for even braking.
Bob's here to help get your ride running sweet. Swing by the shop anytime!

---

🛠️ Bob's Pro Tip: Do the Job Right!
> If you're swapping out these parts on your vehicle, always install fresh brake pads. Check out our compatible TRW Brake Pads (Part No. GDB3058) to ensure a perfect bed-in and get the job done properly first time!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.