DBA Brakes · Part number DBA979S · NZ$285.00 incl. GST
Gotta stop those Beaumas, right? Disc brake rotors are what your brake pads grab onto to slow you down. If you drive a BMW, a DBA rotor is a proper bit of kit.
NZ$285.00 including GST. Part number DBA979S.
Swapping Out Your BMW's Brake Rotors — the DBA Way
> Brake rotors are dead important for stopping your BMW 3 Series, eh? Over time, they get worn down, warped from heat, or just plain rusty. This makes your braking less effective, which is never good, especially when you're giving it a bootful on the open road!
Symptoms That Led You Here
• Brakes squealing like a stuck pig?
• Feeling a judder in the pedal when you brake?
• Taking longer to pull up than usual?
• Rotors looking rough as guts, with scoring or rust?
• Brake pads wearing unevenly?
Will it pass WOF?
Worn rotors are a classic WOF fail. They need to be above the minimum thickness and free from cracks or major damage to pass the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, and possibly a brake caliper piston compression tool.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's make sure you're sorted with the right bits and bobs. Safety first, eh?
• Safety Glasses: Don't want any of that brake dust or rust getting in your eyes. Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from all the brake dust and grime. Nitrile Gloves
• Brake Cleaner: Blast away all that brake dust and gunk. Makes the job easier and safer. Brake Cleaner
• Caliper Grease: Smear a bit of this on the caliper pins to keep everything moving smoothly. Stops those annoying squeaks! Brake Grease
Expert Recommendation
Worn rotors are a no-brainer when it comes to safety. Chucking in new rotors will make sure you've got good, strong braking. Head down to Bob's Shop and we'll get you sorted with the right parts for your BMW.
Fitment Notes
Make sure these rotors fit your exact BMW 3 Series model and year. Double-check the rotor size to match what you've already got. Some models use different rotors on the front and back.
Bob @ CARFIX is always on hand to help you work out exactly what part you need for your BMW. Make sure you head over to Bob's Shop for a chat!
---
🛠️ Bob's Pro Tip: Do the Job Right!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.