DBA Street Gold Cross-Drilled & Slotted Disc Brake Rotor
DBA Brakes · Part number DBA791X · NZ$307.00 incl. GST
Gotta stop that big beast, eh? Disc brake rotors are what scrub speed in your Toyota Land Cruiser. When they're shagged, you're in trouble!
Price
NZ$307.00 including GST. Part number DBA791X.
Fits these vehicles
Description
Land Cruiser Disc Brake Rotor Swap — With DBA Focus
> Your Land Cruiser's disc brake rotors are dead important. They cop a hiding, especially if you're giving it heaps off-road or towing. Over time, that friction wears 'em down, and your braking goes to custard.
Spotting the Warning Signs
• Brakes sound like a flock of seagulls?
• Steering wheel doing the Macarena when you brake?
• Taking longer to pull up than a cafe lunch?
• Rotors look like they've been attacked by a grinder?
WOF Woes?
Worn rotors are a dead cert WOF failure here in NZ. They gotta be above minimum thickness and not cracked to pass the test. Don't get caught out!
DIY or Hand it Over?
Difficulty: 7/10 (not for the faint-hearted)
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack, stands (never skimp on safety!), wheel brace, socket set, torque wrench (critical!), brake cleaner, and maybe a caliper tool if things are seized.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you go full noise, safety first, eh? Always use axle stands – never trust a jack alone! Grab some Brake Cleaner to blast away that brake dust – it's nasty stuff. A squirt of anti-seize on the caliper bolts will save you grief next time. Don't forget your Safety Glasses and Nitrile Gloves – keep your eyes and hands in good nick! Finally, give those new rotors a quick wipe down with brake cleaner to remove any manufacturing oils.
Expert Recommendation
Swapping out your Land Cruiser's rotors is a no-brainer for safety, especially if you're putting it through its paces. Pop into Bob's Shop, and we'll sort you out with the right bits for your Land Cruiser.
Fitment Notes
Double-check these rotors fit your exact Land Cruiser model and year. Rotor sizes and fitment kits can vary.
Bob's waiting to help you out!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3110DT)](/parts/GDB3110DT) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.