CARFIX

DBA Disc Brake Rotor DBA716S

DBA Brakes · Part number DBA716S · NZ$285.00 incl. GST

Right then, for your trusty Toyota Supra, Estima, Previa, or Tarago, these Disc Brake Rotors are the real deal, turning all that go-fast energy into heat to bring you to a safe, controlled stop – and this DBA option is a top-notch, Aussie-engineered beauty.

Price

NZ$285.00 including GST. Part number DBA716S.

Fits these vehicles

Description

Stop Right There! Your Guide to Awesome Brake Rotors, Featuring DBA
> Alright, let's talk brass tacks. Disc brake rotors are those shiny metal discs your brake pads grab onto to slow you down. Over time, they get a bit thin, can warp from all that heat, or even get scored up if your pads are well past their prime. This is especially true for a Supra that loves a spirited drive, or those hard-working Estima, Previa, and Tarago people-movers doing the daily grind and school runs all over our beautiful Aotearoa.

Symptoms That Led You Here
• Pulsating or vibrating brake pedal under moderate to heavy braking
• Steering wheel shimmy when slowing from highway speeds
• Visible scoring, grooves, or lip formation on the rotor edge
• Grinding noise indicating pad-to-metal contact
• Increased stopping distances, especially noticeable when loaded with passengers
• Uneven pad wear on inspection

Will it pass WOF?
Rotors must meet minimum thickness specifications stamped on the rotor itself. Excessive scoring (grooves deeper than 1.5mm), cracks, or warping that causes pedal pulsation will result in WOF failure. NZ regulations require braking systems to operate efficiently and evenly across all wheels—worn rotors compromise this balance.

DIY or Workshop?
Difficulty: 5/10 | Time: 1.5-2.5 hours per axle | Tools: Jack, axle stands, wheel brace, socket set, torque wrench, brake cleaner, C-clamp or piston wind-back tool

Front rotors on these Toyota models are typically straightforward slide-off designs once the caliper and bracket are removed. The Supra's larger brakes may require more clearance. Rear rotors on the Estima/Previa/Tarago can be trickier due to integrated parking brake drums on some variants. Always replace rotors in pairs per axle and bed in new pads properly.

Expert Recommendation
Listen, when it comes to stopping power, you don't want to cut corners — especially not on a Supra where braking is part of the thrill, or a family hauler like the Estima/Tarago where you're carting precious cargo. DBA (Disc Brakes Australia) designs their rotors specifically for our tough conditions, with thermal stability coatings and precise machining that often beats out the factory stuff. This DBA rotor is a no-brainer for getting that factory-fresh stopping confidence back. Bob @ CARFIX is always on hand to help you work out exactly what rotor spec suits your Supra or people-mover best. Make sure you head over to Bob's Shop for a chat!

Fitment Notes
• Confirmed fitment for Toyota Estima, Previa, and Tarago models from 1990-2000
• Fits Toyota Supra variants from 1986-1993, including 24V models (1986-1988)
• Verify rotor diameter and vented/solid configuration against your current setup
• Supra turbo models may have different brake specifications—confirm before ordering
• Some Estima/Previa variants were sold under different names in different markets; cross-reference your chassis code if uncertain

---

🛠️ Bob's Pro Tip: Do the Job Right!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.