DBA Brakes · Part number DBA514S · NZ$206.00 incl. GST
DBA Disc Brake Rotor by DBA Brakes, part number DBA514S.
NZ$206.00 including GST. Part number DBA514S.
Swapping Out Your Suzuki Vitara/Escudo Disc Brake Rotors
> Your brake rotors are key to stopping safely. They wear down over time, especially with our tough Kiwi roads and conditions. Time for a look-see and maybe a change!
Warning Signs
• Brakes screamin' like a gutted possum?
• Feelin' a judder in the pedal when you brake?
• Taking longer to stop than you'd like?
• Rotors lookin' rusty, scored, or just plain sad?
• Pads wearin' uneven?
WOF Woes?
Worn rotors are a no-brainer WOF failure. Gotta have 'em within spec and not too damaged to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Time: Give yourself a couple of hours per rotor.
New pads are a good idea too.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you even think about touching those brakes, safety first, mate! Grab yourself some safety glasses to keep the dust and grime out of your eyes. And those brake pads? They're covered in nasty carbon dust, so a good pair of nitrile gloves are essential. Once you've got the old rotor off, give everything a good blast with Brake Cleaner to get rid of any lingering crud. When you're putting the new rotor on, a little dab of anti-seize caliper grease on the threads will make life easier next time around. Trust me, future you will thank you!
Bob's Two Cents
Worn rotors? Not worth the risk. Get 'em changed for better braking and to save other parts from damage. DBA's tops for stopping power. Pop into Bob's Shop for a yarn and to get the right parts!
Fitment Notes
Make sure those new rotors are spot-on for your Vitara or Escudo's year and model. Rotor sizes can vary. Always do both sides to keep braking even-steven.
Bob's out!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part 0594.02) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.