
DBA Brakes · Part number DBA42714XS · NZ$431.00 incl. GST
Gotta keep those Toyota Hilux or Fortuner brakes sharp, eh? Disc brake rotors are the workhorses, and this DBA rotor is a top-shelf option for stopping power.
NZ$431.00 including GST. Part number DBA42714XS.
Swapping Out Your Disc Brake Rotors — DBA Featured
> Disc brake rotors are absolutely crucial for safe stopping in your Toyota Hilux or Fortuner. They can wear down over time, warp from the heat, or corrode – especially if you're giving your vehicle a hard time off-road or hauling heavy loads often. This leads to dodgy braking and safety risks. Time to get it sorted!
Spotting the Warning Signs
• Brakes screeches or a proper grinding noise.
• You feel a shudder through the brake pedal.
• Taking longer to stop than usual.
• Rotors looking scored, cracked, or rusty.
• Brake pads wearing unevenly.
WOF Woes?
Worn or damaged brake rotors are a surefire way to fail your WOF here in New Zealand. They need to be above minimum thickness and in good nick to pass the test.
DIY or Get a Pro?
Difficulty: 6/10
Estimated Time: 2-3 hours per axle
Tools Needed: Jack and stands, wheel brace, socket set, torque wrench, brake cleaner, caliper tool (if you have one).
Expert Advice
Worn rotors are a serious safety risk, especially if you're towing or hitting tough terrain. Replacing them means you'll stop properly and reduce the chance of an accident. The DBA rotor (DBA42714XS) is a ripper choice for performance and long life.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you dive in, a few things to keep in mind to make this job smooth and safe. First up, safety glasses are a no-brainer – you don't want any brake dust or debris in your eyes. Grab some Nitrile Gloves too; those brake parts can be grimy.
Now, for consumables: you'll want a can of Brake Cleaner to blast away all that built-up brake dust and grime – give everything a good spray down before you start pulling things apart. And when you're putting the calipers back together, a little dab of anti-seize Caliper Grease on the caliper pins helps keep everything moving freely and prevents those annoying squeaks down the road. Trust me, doing it right the first time saves you a heap of grief later on. Remember, never get under a car supported only by a jack! Use proper stands, mate.
Fitment Notes
Double-check this rotor fits your Hilux or Fortuner model and year. Rotor sizes can vary. Always replace rotors in pairs (both front or both rear) so your braking is balanced.
Bob @ CARFIX is always keen to help you find the right part for your Toyota Hilux or Fortuner. Pop over to Bob's Shop for a yarn!
---
🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part GDB3364) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.