DBA Brakes · Part number DBA3221E · NZ$210.00 incl. GST
Gotta get those disc brake rotors sorted on your Proton Preve or Suprima S, eh? They're what the brake pads grab onto, slowing you down.
NZ$210.00 including GST. Part number DBA3221E.
Swapping Out Your Disc Brake Rotors — DBA Style
> Your Proton Preve or Suprima S relies on disc brake rotors to pull you up safely. Over time, they cop a hiding from friction and heat. This can make your braking a bit average, especially if you're always on the go. Time for a change, mate?
Symptoms That Led You Here
• Brakes sound like a flock of seagulls (squealing)
• Your brake pedal's doing the Macarena (vibrating)
• Taking longer to stop than you'd like
• Rotors look like they've been through a war (scored, cracked, rusty)
• Brake pads wearing unevenly
Will it pass WOF?
Dodgy disc brake rotors are a surefire way to fail your WOF here in NZ. They need to be thick enough and not cracked to pass the test.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per rotor
Tools Required: Jack, jack stands, wrench set, socket set, torque wrench, brake cleaner, wheel chocks
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, let's make sure you're all set. Safety first, eh?
• Safety Glasses: Don't want any brake dust or grime in your peepers. Grab some Safety Glasses from CARFIX.
• Nitrile Gloves: Keep those mitts clean! Brake dust is a bugger to get off. A pair of Nitrile Gloves will do the trick.
• Brake Cleaner: Blast away all that carbon dust and muck from the brake bits. Makes the job cleaner and easier. You can find Brake Cleaner here at CARFIX.
• Caliper Grease: Use some anti-seize caliper grease on the caliper pins and pad contact points to keep everything moving smoothly and quietly. This helps prevent sticking and uneven wear. Grab some at Bob's Shop!
Expert Recommendation
Worn brake rotors? That's a no-go for safety and performance on your Proton Preve or Suprima S. New rotors mean better braking and less chance of mucking up other brake bits. DBA's a good choice, but CARFIX has plenty of others. Bob @ CARFIX is always keen to lend a hand figuring out what you need for your Proton. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure those new rotors fit your Proton Preve or Suprima S like a glove. Double-check the size and mounting pattern.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> Check out our compatible brake pads (part RDB2039) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.