CARFIX

DBA Street Series En-Shield Disc Brake Rotor DBA3204E

DBA Brakes — DBA Street Series En-Shield Disc Brake Rotor  — part number DBA3204E

DBA Brakes · Part number DBA3204E · NZ$342.00 incl. GST

For your trusty Holden Commodore V6, keeping those Disc Brake Rotors in tip-top shape is an absolute must!

Price

NZ$342.00 including GST. Part number DBA3204E.

Fits these vehicles

Description

Disc Brake Rotor Refresh for Your Commodore V6 — With a Nod to DBA
> Alright, let's talk rotors! These bad boys are absolutely vital for keeping your ride safe and sound. They're what your brake pads squeeze against when you hit the anchors. Over time, especially with all that stop-and-go action your Holden Commodore V6 sees around town, they can get a bit thin, warp, or even develop some nasty grooves. When that happens, your braking performance takes a dive, and nobody wants that!
Signs It's Time for a Rotor R&R
• Feeling a bit of a wobble or pulsing through the brake pedal or steering wheel when you slow down?
• Hearing squealing, grinding, or scraping noises that just don't sound right when you brake?
• Notice it's taking a bit longer to pull up than it used to?
• Can you see visible scoring, deep grooves, or funny discolouration on the rotor surface?
• Does your brake pedal feel a bit soft or spongy when you push it?
WOF Check-Up: Will It Pass?
Nah, mate, no chance. If your brake rotors are worn, warped, or damaged, your vehicle will absolutely fail its Warrant of Fitness (WOF) inspection here in Aotearoa. Proper braking isn't just a suggestion; it's a critical safety requirement!
DIY or Call in the Pros?
Difficulty: 6/10 (A bit of a challenge, but totally doable for the keen DIYer)
Estimated Time: About 1-2 hours per axle (perfect for a Saturday morning project before the rugby starts)
Tools Required: Jack, trusty jack stands (safety first!), wheel nut wrench, brake caliper compression tool, socket set, torque wrench, brake cleaner, wire brush, safety glasses, gloves.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, let's make sure you've got everything sorted for a smooth, safe job:
• Safety Glasses: Protect those peepers from any flying dust or debris! Safety Glasses
• Heavy-Duty Nitrile Gloves: Keep your hands clean and protected from grime and brake dust. Nitrile Gloves
• Brake Cleaner Spray: Essential for blasting away carbon dust and grime for a squeaky-clean finish. Brake Cleaner
• Anti-Seize Caliper Grease: A little dab'll do ya to keep those caliper pins moving freely and quietly. Caliper Grease
• Workshop Rags: For all those little clean-ups and spills. Workshop Rags
Bob's Expert Advice
Bob @ CARFIX always reckons you should swap out those brake rotors the moment they start showing signs of wear or damage. It's all about keeping your braking performance tip-top and, most importantly, keeping you safe on the road. This DBA DBA3204E rotor is a fantastic choice — top-quality and built to last. But hey, we've also got a massive range of other trusted names. If you're scratching your head about what part your Holden Commodore V6 needs, just pop over to Bob's Shop for a yarn! He's always keen for a chat and to help you get sorted.
Fitment Fiddly Bits
This particular DBA rotor (DBA3204E) is tailor-made for Holden Commodore V6 models that rolled off the line between 2017 and 2020. Always, always, always double-check your vehicle's exact year and engine setup. Brake bits can be a bit finicky, and even within the same model range, there can be differences. Best to be sure!

Bob's Final Word: Don't skimp on safety, especially when it comes to your brakes! Get it sorted right, the first time. Give us a bell at CARFIX if you're not sure, eh!

---

🛠️ Bob's Pro Tip: Do the Job Right!

🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.