DBA Brakes · Part number DBA2959X · NZ$378.00 incl. GST
DBA Street Gold Cross-Drilled & Slotted Disc Brake Rotor by DBA Brakes, part number DBA2959X.
NZ$378.00 including GST. Part number DBA2959X.
Swapping Out Your Mazda MX-5 Brake Rotors — DBA Style
> Those brake rotors on your MX-5 are vital. They can wear down, warp, or rust – especially with how these cars love to be driven! Time for a change?
Spotting the Warning Signs
• Brakes squealing like a stuck pig?
• Feeling a judder through the pedal?
• Taking longer to pull up at the lights?
• Rotors looking scored, cracked, or rusty?
WOF Woes?
Dodgy brake rotors are a quick way to fail a WOF here in NZ. They need to be above minimum thickness and in good nick to pass the test.
DIY or Workshop?
Difficulty: 6/10
Time Needed: 1-2 hours per axle
Gear You'll Need: Jack and stands, wheel brace, socket set, torque wrench, brake cleaner. You might need a brake caliper piston tool as well.
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you get cracking on those brakes, mate, safety first! Never get under a car supported only by a jack. Use proper stands.
• Safety Glasses: Protect those peepers from flying brake dust and debris. Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from brake fluid and grime. Nitrile Gloves
• Brake Cleaner: Blast away that stubborn brake dust and ensure a clean surface for your new rotors. Brake Cleaner
• Caliper Grease: Use some anti-seize caliper grease to keep everything moving smoothly and prevent future squeaks. Caliper Grease
Expert Recommendation
Worn brake rotors are a no-go for safety and performance on your MX-5. Swapping them out will get your braking back to its best. Bob @ CARFIX is your man for finding the right parts for your MX-5. Pop into Bob's Shop for a yarn!
Fitment Notes
Make sure these rotors fit your MX-5 (2005-2014). Rotor sizes and bolt patterns can vary. Always do both rotors on an axle (both fronts or both rears) for even braking.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB3401)](/parts/GDB3401) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.