DBA Brakes · Part number DBA2958 · NZ$174.00 incl. GST
Need new disc brake rotors for your Mazda 2/Demio or Verisa? These are crucial for safe braking, giving your brake pads the surface they need to slow you down. We reckon the DBA rotors are a top-notch choice, and we stock 'em.
NZ$174.00 including GST. Part number DBA2958.
Swapping Out Your Disc Brake Rotors — Featuring DBA
> Disc brake rotors, those shiny metal discs your brake pads hug, turn your car's movement into heat to bring you to a halt. All that friction and heat eventually wears them down on your Mazda 2/Demio or Verisa. Think warping, cracking, and just plain old wear and tear, especially if you're always battling Auckland's stop-start traffic.
Signs It's Time for a Change
• Brake pedal or steering wheel vibrates when you hit the brakes.
• Brakes squeal, grind, or make a racket when you slow down.
• Takes longer to stop, or the brake pedal feels soft.
• Rotors look scored, grooved, or have weird colours.
• Smell something burning after a bit of hard braking.
Will it pass WOF?
Worn brake rotors? Nah, mate, that's a WOF failure for sure. Your rotors need to be a certain thickness and free from cracks and major damage to pass the test.
DIY or Workshop?
Difficulty: 6/10 (A Good Challenge)
Estimated Time: 1-2 hours per wheel
Gear You'll Need: Jack, jack stands (never skip these!), wheel nut wrench, the right socket or spanner for the brake caliper, C-clamp (or a fancy caliper piston tool), torque wrench, wire brush, brake cleaner, safety glasses, and gloves. Don't forget those safety glasses! You'll be gutted if you get brake dust in your eyes.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, let's make sure you're sorted. Safety first, eh? Always use axle stands when you're under the car, never trust just a jack. Give everything a good blast with Brake Cleaner to get rid of that nasty brake dust. It's not just dusty metal tracks; that stuff's bad for you. Keep some Nitrile Gloves handy to protect your mitts, and a bit of Caliper Grease to keep things sliding smoothly. Safety glasses are a no-brainer, too. You don't want any of that brake dust in your eyes.
Expert Recommendation
Here at CARFIX, we know your brakes are the most important piece of gear on your Mazda. Dodgy rotors mean you won't stop as quick, which is a worry, especially in the city. Get them changed when they're looking tired or are thinner than the minimum. DBA rotors are a solid choice, but we've got plenty of others from brands you know. Give Bob a yell at CARFIX and he'll sort you out with the right rotors for your Mazda. Head over to Bob's Shop for a yarn!
Fitment Notes
These rotors are made for the MAZDA 2/DEMIO (2003-2007) and MAZDA VERISA (2004-2015). Always double-check your car's year, model, and engine size, as brake parts can be different even within the same model range.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1419)](/parts/GDB1419) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.