DBA Brakes · Part number DBA2873S · NZ$223.00 incl. GST
Need new disc brake rotors for your Hyundai Coupe, Lantra, Elantra, or Kia Cerato?
NZ$223.00 including GST. Part number DBA2873S.
Disc Brake Rotor Replacement: Get Your Hyundai or Kia Stopping Like New!
> Your Hyundai or Kia's disc brake rotors are what your brake pads grab onto to slow you down. Over time, especially with the tough conditions of daily driving, these rotors can wear out, warp, or even crack. Don't get caught out with a WOF failure; let's get those rotors sorted!
Spotting the Signs of Worn Rotors
• Brake pedal feels like it's vibrating or pulsing
• Brakes are making a racket – squealing or grinding noises
• Taking longer to stop than it used to
• Rotors look like they've seen better days – cracks or deep grooves
• Your brake pads are wearing unevenly
WOF Woes? (Will it pass inspection?)
If your disc brake rotors are worn past their limits, cracked, or too thin, you're looking at a WOF failure, mate. They need to be up to scratch to keep you safe on the road.
DIY or Get a Pro?
Difficulty: 7/10
Estimated Time: 2-3 hours per axle
Tools Required: Jack and stands, lug wrench, socket set, torque wrench, brake cleaner, rotor removal tool (optional)
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you start yanking those old rotors off your Hyundai or Kia, let's make sure you're set up for success. Safety first, always! Never get under a car supported only by a jack – use proper stands!
• Safety Glasses: Protect your peepers from flying brake dust and debris. Safety Glasses
• Nitrile Gloves: Keep your hands clean and protected from brake fluid and rust. Nitrile Gloves
• Brake Cleaner: Blast away brake dust and grime from the new rotors before installation. Brake Cleaner
• Caliper Grease: Apply a thin coat of anti-seize caliper grease to the caliper slide pins and brake pad contact points to ensure smooth operation and prevent squealing. Caliper Grease
Expert Recommendation
Worn brake rotors are a no-brainer when it comes to safety. Swapping them out with a good set like these DBA rotors will get your Hyundai Coupe, Elantra, Lantra or Kia Cerato stopping like it should. Pop into Bob's Shop for a yarn, and I'll help you find the perfect fit for your ride!
Fitment Notes
Double-check that these rotors are the right fit for your specific Hyundai or Kia model and year. Make sure the rotor diameter and thickness match what your vehicle needs. Keep in mind that front and rear rotors might be different.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1010)](/parts/GDB1010) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.