DBA Brakes · Part number DBA2866S · NZ$285.00 incl. GST
Your BMW 3 or 1 series needs disc brake rotors to stop safely. They're what the brake pads squeeze against.
NZ$285.00 including GST. Part number DBA2866S.
Swapping Out Your Disc Brake Rotors — The DBA Way
> Disc brake rotors are super important for your BMW's brakes. They team up with the brake pads to slow you down or bring you to a stop. Over time, these rotors can get worn out, warped, or even crack, especially if you're giving it a good thrashing every day in your BMW 3 or 1 series.
What Clued You In?
• Your brake pedal's got the jitters (pulsating or vibrating)
• Brakes are making a racket (squealing or grinding)
• Taking longer to stop than usual
• Rotors looking worse for wear (cracks or deep grooves)
WOF Woes?
Dodgy disc brake rotors are a quick way to fail a WOF here in NZ. Your rotors need to be thick enough and free from cracks to pass the test.
DIY or Get a Pro?
How Hard? 6/10
Time Needed: 2-3 hours per axle
Gear You'll Need: Jack and stands, wheel brace, socket set, torque wrench, brake cleaner, caliper tool (if you've got one)
🛠️ Bob's "Get It Done Right" Companion Checklist
Before you dive in, mate, safety first! Never get under a car supported only by a jack. Use proper stands.
• Safety Glasses: Keep that brake dust out of your peepers. Grab some Safety Glasses.
• Nitrile Gloves: Brake dust and grease are minging. Keep your hands clean with Nitrile Gloves.
• Brake Cleaner: Blast away all that built-up carbon dust before you start fiddling. A can of Brake Cleaner is your best mate here.
• Caliper Grease: A little dab of anti-seize caliper grease on the right spots will keep everything moving smoothly and prevent future squeals.
Expert Recommendation
Worn brake rotors are a no-brainer when it comes to safety. Get them sorted to get your braking back to how it should be. Bob at CARFIX is always keen to help you find the right part for your BMW. Call into Bob's Shop for a yarn!
Fitment Notes
Make sure the rotors fit your exact BMW model and year. Rotor sizes can vary, and you might need special tools. Double-check the rotor diameter and thickness before you start, especially for those BMW 3 and 1 series models.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1123)](/parts/GDB1123) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.