DBA Brakes · Part number DBA2837E · NZ$182.00 incl. GST
Need new brake rotors for your European ride? Crucial for safety, especially on VWs, Audis, and Skodas.
NZ$182.00 including GST. Part number DBA2837E.
Swapping Out Your Disc Brake Rotors — The DBA Way
> Disc brake rotors are the unsung heroes of your braking system, turning all that kinetic energy into heat faster than you can say 'cafe lunch'. If you're rocking a VW Golf GTI or Skoda Superb, you know what tough conditions can do to your rotors – warping, cracking, the whole shebang. Time for a swap?
Symptoms That Led You Here
• Brake pedal doing the jitterbug?
• Squealing like a gutted pig when you brake?
• Stopping distances longer than a summer holiday?
• Rotors looking like they've been through a war?
• Brake pads wearing unevenly? That's a worry.
Will it pass WOF?
Don't even think about chancing a WOF with dodgy rotors. Minimum thickness, no cracks – the VTNZ guys have seen it all before.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1.5 - 2 hours per axle
Tools Required: Jack and stands, wheel wrench, socket set, torque wrench, brake cleaner, rotor removal tool (optional)
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, listen up! Safety first, always. Never, ever get under a car supported only by a jack. That's just asking for trouble. Grab some safety glasses to keep the crud out of your eyes, and a pair of nitrile gloves to keep your hands clean. Now, before you even think about bolting those new rotors on, give everything a good blast with brake cleaner to get rid of all that nasty brake dust. And a tiny dab of anti-seize on the caliper bolts will be your best friend next time you're in there.
Expert Recommendation
Worn rotors are a no-brainer when it comes to safety. Get them sorted! Come on down to Bob's Shop – I'll sort you out with exactly what you need for your VW or Audi.
Fitment Notes
Double-check those rotor sizes! Make sure they match your car's specs exactly. Some models have different sizes depending on the trim level.
---
🛠️ Bob's Pro Tip: Do the Job Right!
> GDB1551)](/parts/GDB1551) to ensure a perfect bed-in and get the job done properly first time!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.