DBA Brakes · Part number DBA2829S · NZ$186.00 incl. GST
Gotta stop those ponies, eh? For top-notch braking on your Audi TT TFSI or SAAB 9-3, disc brake rotors are the key. Sorted!
NZ$186.00 including GST. Part number DBA2829S.
Disc Brake Rotor Replacement Guide — Featuring DBA
> Disc brake rotors are what bring your Audi TT or SAAB 9-3 to a halt, giving your brake pads something to really bite into. But, like a good pair of jandals, they don't last forever. Heat and hard use will wear 'em down, especially if you're giving it the beans on the open road.
Symptoms That Led You Here
• Brake pedal doing the Macarena (vibrating)
• Brakes squealing like a stuck pig
• Taking longer to pull up than a cafe lunch queue
• Rotors looking like they've been attacked by a grinder
• Brake pads wearing unevenly – suss!
Will it pass WOF?
Dodgy brake rotors are a surefire way to fail your WOF here in the land of the long white cloud. They need to be thick enough and free from cracks to pass the test. No worries, we'll get you sorted.
DIY or Workshop?
Difficulty: 6/10
Estimated Time: 1-2 hours per rotor
Tools Required: Jack, jack stands (never skip these!), lug wrench, socket set, torque wrench, brake cleaner, and maybe a rotor puller.
🛠️ Bob's "Get It Done Right" Companion Checklist
Alright, before you get stuck in, a few quick words from yours truly. Safety first, always! Never get under a car supported only by a jack – that's a no-brainer. Grab some safety glasses to keep the dust and grime out of your eyes. And don't forget a pair of nitrile gloves – those brake bits can be filthy! While you're at it, a can of brake cleaner will blast away all that carbon dust, and a bit of anti-seize caliper grease will keep things smooth. Trust me, a little prep goes a long way.
Expert Recommendation
Worn brake rotors are a safety risk to you and everyone else on the road. Replacing them means better braking and peace of mind. Swing by Bob's Shop – I'm here to help you find the perfect fit for your Audi TT or SAAB 9-3. Chur!
Fitment Notes
Double-check that the new rotors are right for your specific Audi TT or SAAB 9-3 model and year. Rotor sizes and bolt patterns can vary. Always replace rotors in pairs to keep your braking balanced and even.
---
🛠️ Bob's Pro Tip: Do the Job Right!
🧰 What Else You'll Need:
• Safety First: Never work under a vehicle supported only by a jack. Always secure it on heavy-duty safety jack stands.
• Brake Dust Protection: Keep a pack of Nitrile Gloves handy to protect your hands from grease and dust.
• Clean and Prep: Use Brake Cleaner to clean the anti-corrosion shipping oil off the new rotors before mounting the calipers.
• Lubrication: Apply caliper grease to caliper slide pins and pad contact points to prevent squealing.